Searched and couldn't find much. Anyone running 31's and a 3in body lift? Don't know if the rake in the front will be to much with my 2wd. Trying to decide between bl or spindles

----------

Forgive my misspellings my fat fingers don't work to well on the iPhone

If you searched you'd find thousands of pictures.

__________________
2001 Ranger XLT | 3.0L | 2WD | Thrush Welded Muffler | Alpine Sub | HIDs

All with leveled front ends

Honest just go with spindles and a shackle or block. It'll level it out nicely too.

__________________
2001 Ranger XLT | 3.0L | 2WD | Thrush Welded Muffler | Alpine Sub | HIDs

I'm just so impacient the 2011 spindles from doestch are almost $400 and I need new tires cause the ones I got today I'm taking back

No I understand. Honestly though, you got yourself a nice 2011, I'd just do the top notch stuff first since its only 2 years old. So I'd do it right the first time and after if you need more lift you can either make a 5.5 kit out of it or add a body lift to what you already have. What's $400 for a lift on a 2 y/o truck?

__________________
2001 Ranger XLT | 3.0L | 2WD | Thrush Welded Muffler | Alpine Sub | HIDs

Yea what tommy said just do it right the first time. A bl won't level you out you will sit the exact same as you do right now just 3 inches higher. You can run 31s without a lift until you can get the money for a lift. That's what I did and I'm extremely happy

__________________
03 Ranger XLT 4x2 | 3.0l 2-door ext. cab auto trans | BTF Fabricated Spindles/Camburg Upper Arms/Camburg 2.5" coils/Bilstein 5100s/Limit Straps | 2" shackles/2.5" blocks | airbox mod w/ k&n drop in | thrush welded | blacked out emblems | 6000k hids | 06+ tails & corners | Cargo Light Mod | Billet Grille | Custom Bumper | Hella 700ffs | 32x11.5x15 BFG AT KO | 15" Procomp 7031 | Buggman LED Mustang Dome/Cluster/Reverse Lights | Kenwood Headunit | FORD floor mats

^ x2 i ran 31s with no lift for a while. then cranked my tbars for now and it looks good

__________________
01 ranger edge
http://www.fordrangerforum.com/proje...ld-thread.html

^^build^^