hello to all. i bought a set of wheels like the title says for my ranger. the problem is the hole inside of the wheel will not fit over the dust cap? what would be the easiest fix for this problem. i thought all ranger wheels would fit all rangers but i assume this is incorrect. thanks for everyones time.

you will have to take it to a machine shop to have the hole bored out or sell them and go aftermarket

__________________

ok bored out to what size? do i need them all bored out or just the front 2? thanks

Do all 4 so that you can rotate all 4

__________________
2004 XLT 4x4, Belltech 6400 shackles,Chevy leaf springs, Mildly cranked Tbars,stock blocks removed,265/75/16, Construction cap,

X2

I dont know, just enough to allow you clearance to fit. only problem is you wont be able to use little centercap

__________________

your gunna lose those center caps anyhow once and if the get bored out. I always had issues with my one rim...every 2k miles the right rear would be gone. So I gave up on the caps.

__________________

u rotate every 2k miles!? that's crazy!

__________________

does using a dremel to bore it out some sound like a very bad idea? if so there is a machine shop pretty close to my house.

No, bring it to a machine shop, the time it would take to do it with a dremel would be killer.

__________________
2001 Mazda B-3000 CabPlus "FX2 Off Road"| 3.0 | 5 SPD | 3 In Spindle Lift | Belltech Shackles | UltraGauge |Alpine Head / 10" Kicker Setup | Air Box Mod | Add-A-Leaf| Thrush Welded B4 Rear Wheel | Kobalt Box | Cobra 19 DX IV | Custom PA Speaker | Front/Rear Tow Receiver | 2X Aux Lights | Hideaway Strobes | Back Rack Safety Rack | Amber LED Strobes | Blue LED Strobes | 265/75/R16 General Grabber AT2's

check out machine shops in the Yellow Pages or DEXKNOWS.COM

nooo...the center cap would disappear.

__________________

ok just an update, but i gave the dremel a try and removed a tiny lip im assuming helped to hold the center cap on. took about 20 mins but now the wheel will go all the way on and stop just shigh about 1/8 from the hub. but it does sit perfectly on the hub. so this morning i bought (4) 5/16inch wheel spacers to make up for that 1/8inch it wont go back any further. Im thinking problem solved i hope. what do you guys think? thanks

pictures?

__________________
01 xlt 3.0 extended cab
Kenwood speakers
JVC head unit
Fusion 12" sub and Fusion amp
Monroe coilover shocks in the rear
Tow Package
Mustang Dome

will have some up later today when i put everything on. still at work