Dick Cepek wheels - dc2's

[Peterf]

Hi , ive decided these are what i want for my truck .Wondering if someone could help on with them , what do i need for a back spacing ? and im going to put my stock tires on them for now but in a few months time plan on some 31s or 265 75 . do i need 8s or 10s? . these are what i am thinking. Also did anyone ever buy from nationalwd? .. how are they ? . thanks in advance

http://www.national4wdonline.com/car...duct_id=145009

[dixie_boysles]

just get them in a 15x8 with 3.75 backspacing if available. I dont have DC2s, but here is my stance with 15x8, 3.75 BS, 31X10.50R15 BFGs

[Peterf]

stocksss are 16 though and id like to use them tires for a while and would going with a smaller rim mess with warrenty? . so im guessing i should go with 16-8 ? . but what back spacing? .

[dixie_boysles]

AHHH, you got me then. yes, go with a 16x8. but i dk what BS. ask STL, he has the DC1s like them:

http://www.fordrangerforum.com/priva...o=newpm&u=3703

here is his truck:





his are 16s with a 31 equivalent in metric tires

----------

I also moved this thread to wheels and tires section

[Peterf]

awesome , thanks alot bud . would it be the same with his being 2wd? . now if only i had my trust built up on that site haha i love the look of these . i am thinking i am going to be able to clear a set of 31 bfg's? that is my later plan for tires.

[CUTiger]

You'll clear 31s without any problems, as for backspacing it should be the same regardless of wheel diameter. I'm pretty sure that only changes with width.

[Peterf]

ok so i should try and find a 3.75 or 4? . what are you running ?

[CUTiger]

Mine are 3.75", puts the tire right at the outside edge of the fenders. I would try to get a 3.75 or 4 though, either one will work.