I have found a set of wheels but they are on a rolled Ranger.
I am told that aluminum wheels don't bend they break. I do not know, wondering what thoughts are. It's would be a 3 hour one way trip for me so I would like to be a little more confident. The truck fires right up, no issues but all panels are fubar.

__________________
Current Mods
White gauges and Temp Cntrl, OHCw/Buggman LED mod,
Bosch +4, Accel Coil Pack, MSD6AL, Walbro, HiFlo Fuel filter,
Custom Ram Air, K&N, Ported / Matched intake, JBA 9mm wires,
Tweeked FPR, EBC 6k's, DynoMax-S CatBack, Jet-Chip, Reflex shocks,
New Anvil Mounts, Timbren's, Optima Yellow, DB 220A Alt. w/4g. jumper,
Western snow plow, More2Come

buy the whole dang truck if its cheap, especially if it has 4.0

__________________

But what to do with it? Talked to a bud who's got a 2.3 94 or so and he's giving some thought to upgrading his truck with it. He's a builder, has a gorgeous tubbed 50's chevy, dropped on Foose 5's, chromed up and wood bed deck.

__________________
Current Mods
White gauges and Temp Cntrl, OHCw/Buggman LED mod,
Bosch +4, Accel Coil Pack, MSD6AL, Walbro, HiFlo Fuel filter,
Custom Ram Air, K&N, Ported / Matched intake, JBA 9mm wires,
Tweeked FPR, EBC 6k's, DynoMax-S CatBack, Jet-Chip, Reflex shocks,
New Anvil Mounts, Timbren's, Optima Yellow, DB 220A Alt. w/4g. jumper,
Western snow plow, More2Come

How does a wheel break?

__________________
ɹǝʌo ǝɯ dılɟ

the stress from the roll and the hard hit could break the wheels

Yea but I am wondering if it could be that it bent them, once I have it that's it. I'm stuck. . .

__________________
Current Mods
White gauges and Temp Cntrl, OHCw/Buggman LED mod,
Bosch +4, Accel Coil Pack, MSD6AL, Walbro, HiFlo Fuel filter,
Custom Ram Air, K&N, Ported / Matched intake, JBA 9mm wires,
Tweeked FPR, EBC 6k's, DynoMax-S CatBack, Jet-Chip, Reflex shocks,
New Anvil Mounts, Timbren's, Optima Yellow, DB 220A Alt. w/4g. jumper,
Western snow plow, More2Come

Aluminum wheels, can bend, but not as much as steel before they break. On an impact, most likely it they are not broken, they will be ok, but theres no guarantee.

__________________

Yea that's about as definitive as I figured I'd get. . . .
Thanks.

__________________
Current Mods
White gauges and Temp Cntrl, OHCw/Buggman LED mod,
Bosch +4, Accel Coil Pack, MSD6AL, Walbro, HiFlo Fuel filter,
Custom Ram Air, K&N, Ported / Matched intake, JBA 9mm wires,
Tweeked FPR, EBC 6k's, DynoMax-S CatBack, Jet-Chip, Reflex shocks,
New Anvil Mounts, Timbren's, Optima Yellow, DB 220A Alt. w/4g. jumper,
Western snow plow, More2Come

if it starts drive it and see if they wobble you said it starts right up so you should be able to drive it some

__________________
Jay's
09 XL reg cab
L4 2.3 , 40 series flowmaster , tinted windows 5% back 35% sides ,muffler removed from air box mod ,and ac on off switch mod , blinker mod, avs window vent shades
coming soon! k&n drop in/fiberglass bed cover/bed sprayed liner

Yea that was the thought c'ept the driver reare hub was snapped off.

__________________
Current Mods
White gauges and Temp Cntrl, OHCw/Buggman LED mod,
Bosch +4, Accel Coil Pack, MSD6AL, Walbro, HiFlo Fuel filter,
Custom Ram Air, K&N, Ported / Matched intake, JBA 9mm wires,
Tweeked FPR, EBC 6k's, DynoMax-S CatBack, Jet-Chip, Reflex shocks,
New Anvil Mounts, Timbren's, Optima Yellow, DB 220A Alt. w/4g. jumper,
Western snow plow, More2Come

bummer well hope it works out for you and looks like driver front has a spear and not the nice rim

__________________
Jay's
09 XL reg cab
L4 2.3 , 40 series flowmaster , tinted windows 5% back 35% sides ,muffler removed from air box mod ,and ac on off switch mod , blinker mod, avs window vent shades
coming soon! k&n drop in/fiberglass bed cover/bed sprayed liner

yes they can brake or bend all depends on the hit they take, no way to tell untill you balance them

__________________
98 4.0 2wd-----supercharger fully build heads cam...all show with go......3 time world of wheels champ 5 time national winner


lots of ranger parts for sale leftovers from my 94/96
96 sitting on the frame, waiting to go lower


custom billet parts by me intake adapters and billet steps for the step sides

please sign my guestbook!!
http://breyperformancemachine.shutterfly.com/

Yea kind of what I thought, it's just the guy was adamant about them not bending, so if they were not broke then they would be perfect. . . I just wasn't gonna challenge him in ignorance, as I am not a metalurgist. Thanks All, I'll post the outcome.

__________________
Current Mods
White gauges and Temp Cntrl, OHCw/Buggman LED mod,
Bosch +4, Accel Coil Pack, MSD6AL, Walbro, HiFlo Fuel filter,
Custom Ram Air, K&N, Ported / Matched intake, JBA 9mm wires,
Tweeked FPR, EBC 6k's, DynoMax-S CatBack, Jet-Chip, Reflex shocks,
New Anvil Mounts, Timbren's, Optima Yellow, DB 220A Alt. w/4g. jumper,
Western snow plow, More2Come