after waiting nearly 3 months i got my bfg km2 tires in for my 2006 level 2 with 3" body lift. I've been in a alcohol revovery program for almost 90 days now, In Texas baby. anyway these were sopposed to be a welcome home present for me, but the guy in at the shop 2000 miles away said the tires will rub the fendors! they are 33x10.5x15, i thought they would fit with the bl. demonfx4 has the same set up. I dont know if i should now order spacers or start all over again. I'l check back on the forum tomorrow night, thanks

__________________
2006 Level2, Flowmaster 44 Dumped, Airade intake, Bull Bar
3" Bodylift, 33x10.5x15 BFG KM2, Blacked out headlights, Hella 500's

I dont get why they wont fit. Jewler54 had that size on his truck at one time.

__________________

That tire tech is the biggest fucking moron ever! With a body lift and a tbar crank we can fit 35's! hell the normal size for just a BL'd ranger is 33x12.5. Tell him he is a ******* and to put them on. If it was me I'd smack the guy upside the head and tell him not to think and get to work lol.

__________________
No ride ATM

my tires rub alittle bit. it doesnt hurt anything if you just do your best not to turn all the way

__________________
94 Mazda B2300
jvc head unit scosh hds and xplod speakers also have 2 12 inch subs in the back.
american racing directionals on 30/9.5/15s
INDIANA RANGERS
MAZDAS

Your running a TTB truck he's running a TBAR/A-Arm truck it works different. 33x10.5 easily clears on a 3" BL I ran them on my truck with a 1" BL and had plenty of space.

__________________
No ride ATM

My only guess as to why they might rub would be if you had one hell of an offset rim that when you turned they would catch. But with a 10.5 on a standard offset you wont have any problems. I have 33's with 9" lift, my tires rub the control arm when I crank the wheel over, but I have a 12.5" on standard offset rims, and thats why they grab.

__________________
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install

I have 32's and just a torsion crank . that tire guy is a moron.

__________________
2001 Ranger Edge 4x4 (sold)
2006 F150 Lariat 4x4 (sold)
2007 Explorer XLT (Destroyed by Deer on highway)
2014 Explorer XLT (inherited from parents)

ive got 33-12.5-15s with just a tbar crank and mine dont rub. but i dont have a front valance on

__________________
2004 Step-side xlt4x4 4.0L 5-speed
Build Thread
37-14.5-15 Toyo M/T, 3 inch body liftProjected HID's, smoked tails, LED '06 corners, LED tails, LED back up lights
Intake, Chip, Straight Piped
Black interior with silver accents, LED Gauges, '04 Fx4 buckets, '99 expo full length console, Hurst Shifter

The red truck is running 33's on a very slight t-bar crank, and a 1/2" valence trim. No BL. You will be fine.

__________________
Schwinn Super-Sport, Nikon D90 ROLLED: 2001 Ford Ranger XLT Super Cab 4X4MODS
Buy my pictures at Imagekind!

would spacers make any difference?

__________________
2006 Level2, Flowmaster 44 Dumped, Airade intake, Bull Bar
3" Bodylift, 33x10.5x15 BFG KM2, Blacked out headlights, Hella 500's

you dont need spacers. Are you running stock wheels or aftermarket?

__________________
No ride ATM

ya the stock alcoas

__________________
2006 Level2, Flowmaster 44 Dumped, Airade intake, Bull Bar
3" Bodylift, 33x10.5x15 BFG KM2, Blacked out headlights, Hella 500's

Dude your totally fine then. The guy at the shop is a moron. I ran alcoas with 33x10.5 on a 1" and also a 3" BL and had plenty for room with both.

__________________
No ride ATM

did you try sconing?

----------

ah, wait, sconing is for rims. haahha. my bad

__________________
2003 Ford Ranger Edge
Autobot
WISH LIST:
Halo headlights
Mud grapplers/ off-road rims

well tires are on, i'l do a review next weekend

__________________
2006 Level2, Flowmaster 44 Dumped, Airade intake, Bull Bar
3" Bodylift, 33x10.5x15 BFG KM2, Blacked out headlights, Hella 500's