new to the thread with a few questions.

[bagelshome]

hey guys,
i did a swap with my grandpa for his 98 2wd ranger recently and its time to make it mine. I would like to know what the best lift for my money would be ive been looking at this recently http://www.suspensionconnection.com/...uscon/883.html

and i would also like to know what are the largest tires with out complications i could get on it?

thanks guys.

[pooleo]

Alot of guys run 33's with a 3" BL. I like 32's on a 3". Especially if you have 3.73 or 3.55 gears.

[STL]

You can run 33's may need to trim a little.
http://www.fordrangerforum.com/wheel...tire-size.html<==CLICK

You will wanna check your rear axle gears. You would wanna upgrade if you have 3.55 4.10's will be best especially if your gonna run 31"-33" tires. My truck was sluggish with 3.55 gears and 31" tires.

http://www.fordrangerforum.com/drive...xle-codes.html<==CLICK

[bagelshome]

thank you, should both pieces of information be on the tag?

[STL]

Which 2 pieces of info?

[pooleo]

Tag should say gear ratio (4.10, 3.73, 3.55, 3.08, etc) and axle size. 8.8 or 7.5.

It might not show the dot and will be spaced ie: 3 7 3

[STL]

Will look like this easier to just look at the door jam to reference the number then match on the chart.


4 10 8 8 = 4.10 8.8


If Limited Slip it will have another tag with it on the other side.