Im new to the forum and still figuring everything out but ive had a question for about a year now that i can't find an answer to. i have an 04 v6 4 liter 4x4 xlt ranger with a flarside bed. i have a 3" body lift waiting to be installed buti want to upgrade my tires and wheels at the same time. what would be the biggest or best comboe that would fit the ranger with the 3" lift without rub? thanks for any advice

Chart of maximum tire size

Make sure you try using the search function before you ask such simple questions.

thanks still trying to figure the site out

Sometimes the search function doesn't work very well, but honestly your question is THE most asked question here lol

Welcome to the forum

Hi, With a three inch lift you should be maxim out at 33's but 31's should be better.
I have 35's with a four inch lift but I did have to trim the front bumper some what to accommodate for tire turning .

__________________
BLACK GHOST............................................. .............. '03 edge 2wd 4"body lift + 6"rear suspension lift running on bf Goodrich 35x12.5x15R with 2" all around hubcentric spacers

Soo just because I dont like poor information for people later on.

First off the original poster has not logged in since thread was made. Its been a few months.

Next OP had a 4x4 truck. These basically come with 31s stock. So 31s and a 3" body lift are a little small.

You did get it right and said the 33s should be max for a bodylift. This is true.


Finally... based on your signature and another post you have made. How do you personally have the only 4" bodylift?

Even at this "4"" bodylift I wouldnt run 35s on a 4x4 let alone a 2wd truck (Granted I now see that you have an edge. So technically the same as 4x4). Anything other than smooth pavement has to hate you.

__________________

3" body lift spacers + 1" worth of washers
Solid as a rock bro.

__________________

oh snap. The ole trusty washer trick.

__________________