 |
05-29-2015, 02:43 PM
|
 |
Ford Tough
|
|
Join Date: Sep 2011
Posts: 306
|
|
got the front rims in
I got the front rims in. I'm going to a 9 inch so it will be a little before they are ordered.
|
| Register and never see these ads again. |
|
|
07-17-2015, 11:55 PM
|
|
Ford Tough
|
|
Join Date: Sep 2011
Posts: 306
|
|
Re: got the front rims in
I'm staying with the 8.8 but I ordered the back rims. The 28x12.5 et streets did not make it but they said like Tuesday. I'm pulling the rear end out to have a 4:30 gear and spool installed 
|
08-20-2015, 02:50 PM
|
|
Ford Tough
|
|
Join Date: Sep 2011
Posts: 306
|
|
Rear end is done 4:30 gears and a spool , 9 inch ends, tubes welded
image-1964768666.jpg
|
08-20-2015, 02:55 PM
|
 |
Welcome to FRF, & enjoy!
|
|
Join Date: Oct 2009
Posts: 5,130
|
|
Re: got the front rims in
oooo pretty
__________________
2000 Ford Ranger XLT 4x4 Offroad, 4.0L ext cab, Converted to Manual M5OD-R1HD.
_____________
33x13.50 Toyo M/T, 15x10, Body Lift, Rebuilt OHV, JBA headers, Hurst shifter, Warn VR10000-s, Class 1 bars, Belltech Shackles, Mustang GT rear disc, Level II hooks, Modded rear hitch, Custom front hitch, Level II Blue seats and black console, Explorer IRS rear cover, Extang fulltilt, Leer Cap Yakima Roof Rack, Cobra 29 with firestik stake mount, Scangauge II
Few mods  |
08-24-2015, 09:24 PM
|
|
Ford Tough
|
|
Join Date: Sep 2011
Posts: 306
|
|
Re: got the front rims in
About done installing the rear end but I think the lugs are to short but the shop said its fine. Guess I'll have to see what the track says. 
----------
|
08-25-2015, 09:18 AM
|
|
Ford Tough
|
|
Join Date: Sep 2011
Posts: 306
|
|
When you hit the gas now it moves
image-442090436.jpg
|
08-28-2015, 08:43 PM
|
|
Ford Tough
|
|
Join Date: Sep 2011
Posts: 306
|
|
Re: got the front rims in
|
08-28-2015, 08:47 PM
|
 |
Go ahead, make my day
|
|
Join Date: Sep 2012
Posts: 1,841
|
|
Re: got the front rims in
Those are some nice #'s. Your R/T and 60' are really good.
__________________
93 Ranger XL 3.0 V6
-Tint, wheels, K&N filter, Flowmaster super 44.
04 Mustang GT Vert.
-Tons of mods, supercharged 392/393
Quote:
Originally Posted by stateranger
If want real power you need to Plasti-Dip the entire engine including the valves and bearings, that's good for up to 150 horsepower.
|
|
08-28-2015, 09:15 PM
|
 |
Woosah
|
|
Join Date: Mar 2014
Posts: 1,105
|
|
Re: got the front rims in
I like, looks like it runs good
__________________
1997 Ranger xlt standard cab stepside. 2.3 5 speed
06 mirrors, white face gauges, explorer limited leather seats, shorty console, UWS Toolbox, proper hitch, proper spray in bed liner.
Build Thread
1981 Honda CB900c fully dressed
2004 Jeep Wrangler 2.4 5speed
|
09-05-2015, 11:20 AM
|
|
Ford Tough
|
|
Join Date: Sep 2011
Posts: 306
|
|
Re: got the front rims in
thanks, I think it will go a little faster when it cools off. it was about 90 degree's that day. I looked at the plug and it looks lean to me. I checked the fuel pressure and it was at about 6.5 psi so I raised it to 7 psi. I may give it about 2 more degrees of timing because its locked out at 32 total timing. I like it to run mid 11s
|
09-05-2015, 11:22 AM
|
 |
Ford Ranger Driver
|
|
Join Date: Jan 2015
Posts: 843
|
|
Re: got the front rims in
Nice truck, looks like it runs good by those #s!
|
09-24-2015, 06:44 AM
|
|
Ford Tough
|
|
Join Date: Sep 2011
Posts: 306
|
|
Re: got the front rims in
it did better but it broke the tail housing.
|
| Thread Tools |
Search this Thread |
|
|
|
|
 |
Similar Threads
