I want to fit 33s on my stock 2004 b2300. Can I do this by just adding a new 2 inch leveling kit?

__________________
I have a stock 2wd 2.3l 4cyl 2004 Mazda b2300 which is a base ranger. I have no mod done to it.

if you browse or search the site you will find your answer in the sticky under wheels and tires
http://www.fordrangerforum.com/wheel...tire-size.html
quote" * 15x7 body lift or suspension lift - 30x9.5x15, 31x10.5x15, 32x11.5x15, 33x10.5x15(may need to trim), 33x12.5x15(will need trimming)"

so body lift not a level kit


Also, putting 33 you should regear


and i would NEVER put 33 on a 4 banger..... it will hate you


but to each their own

----------

also consult
http://www.fordrangerforum.com/wheel...tio-guide.html

----------

and for more reading
http://www.rangerpowersports.com/for...nnin-33-quot-s

That's why I posted, I want a good opinion on what I should do. I'm 17 so I'm pretty in this field. Should I just go with some 31s and leave the truck alone other than that?

__________________
I have a stock 2wd 2.3l 4cyl 2004 Mazda b2300 which is a base ranger. I have no mod done to it.

31s would be a better route to go.

__________________
1997 B2300 reg cab 2.3 Lima, 15x8.5 Mickey Thompson classic 2, 31x10.50 cooper discover at3, 7.5 open 4.10 rear, dynomax super turbo catback, alpine iva-w200 w/ nav, kicker 6x8s, alpine type R 8, alpine 250W mono amp, power bass 400.4, tool box & camper shell, compustar alarm/remote start.
1956 Ford F100 rust bucket with big plans!

Okay and I could fit that on there stock with no lift?

__________________
I have a stock 2wd 2.3l 4cyl 2004 Mazda b2300 which is a base ranger. I have no mod done to it.

On a 04 not sure. My 97 b2300 I can. But I have different suspension then the 04 does.

__________________
1997 B2300 reg cab 2.3 Lima, 15x8.5 Mickey Thompson classic 2, 31x10.50 cooper discover at3, 7.5 open 4.10 rear, dynomax super turbo catback, alpine iva-w200 w/ nav, kicker 6x8s, alpine type R 8, alpine 250W mono amp, power bass 400.4, tool box & camper shell, compustar alarm/remote start.
1956 Ford F100 rust bucket with big plans!

from the chart
01-08

XLT & XL 2wd

* 15x7 stock suspension - 215x75x15, 235x75x15, 235x60x15, 30x9.5x15, 31x10.5x15(may need to trim)

* 15x8 stock suspension - 30x9.5x15, 31x10.5x15(may need to trim)

* 15x7 body lift or suspension lift - 30x9.5x15, 31x10.5x15, 32x11.5x15, 33x10.5x15(may need to trim), 33x12.5x15(will need trimming)

* 15x8 body lift or suspension lift - 30x9.5x15, 31x10.5x15, 32x11.5x15, 33x10.5x15(may need to trim), 33x12.5x15(will need trimming)

* 15x7 body lift AND suspension lift - 32x11.5x15, 33x10.5x15, 33x12.5x15(may need to trim)

* 15x8 & 15x10 body lift AND suspension lift - 32x11.5x15, 33x10.5x15, 33x12.5x15(may need to trim)
.................................................. .................................................. ............
So with a stock suspension "31x10.5x15(may need to trim)"

I have a 4inch lift on my 94 ranger splash supercab. And I have 33's. But my engine is a 4 liter v6. It has a lot of power. And I didn't have to regear either.

Don't worry about my paint. We are getting her ready for me to drive on the weekends. Only 2 little dinks in it. Then spray it with primer

Attached Images

	image-739693856.jpg (84.3 KB, 22 views)
	image-356795589.jpg (92.8 KB, 31 views)
	image-3973231636.jpg (89.3 KB, 23 views)