I wanna fit some 12.5 in wide tires... gonna need a bit of back spacing or what ever its called... to clear the tires... are the cheap soft 8's pushed out far enough?

__________________
'03 Ranger 4x4 XLT
WISH LIST: 1.) PA 3in. body lift 2.) Torsion crank, shackles or (AAL) and extended shocks 3.) 33in. BFGoodrich T/A or M/T
INSTALLED: 1.) Cold air RAM intake 2.) Straight pipe from cat back 3.) 12" Sub audio system 4.) 265/70-16 Mickey Thomson Baja STZ 5.) Rear lift shackles and 2" torsion bar lift

I think they have a 4" backspacing so they should work, 3.75" or 4" is what you're gonna want.

__________________
2002 Edge 4x4 3.0l v6 | 3" body lift, torsion bar crank
15x10 fuel revolvers, 33x12.50 general grabber AT2's
TAG winch bumper, smittybilt 9500lb winch
6000k HID'S, 2 sets of rigid industries dually LED's
MBRP catback stainless steel exhaust
06+ mirrors, and many more upgrades

So less backspacing pushes the rim out from the spindle

__________________
'03 Ranger 4x4 XLT
WISH LIST: 1.) PA 3in. body lift 2.) Torsion crank, shackles or (AAL) and extended shocks 3.) 33in. BFGoodrich T/A or M/T
INSTALLED: 1.) Cold air RAM intake 2.) Straight pipe from cat back 3.) 12" Sub audio system 4.) 265/70-16 Mickey Thomson Baja STZ 5.) Rear lift shackles and 2" torsion bar lift

yes, the smaller the number, the farther they will stick out. I see that you dont have flares. 3.75 should make them stick out a hair past the fenders

__________________

2017 Ford Fiesta ST
2014 Ford Escape Titanium Ecoboost AWD

Thanks I'll keep my eye out for those numbers

__________________
'03 Ranger 4x4 XLT
WISH LIST: 1.) PA 3in. body lift 2.) Torsion crank, shackles or (AAL) and extended shocks 3.) 33in. BFGoodrich T/A or M/T
INSTALLED: 1.) Cold air RAM intake 2.) Straight pipe from cat back 3.) 12" Sub audio system 4.) 265/70-16 Mickey Thomson Baja STZ 5.) Rear lift shackles and 2" torsion bar lift