Lets see your Lifted Ranger - Page 3

TrePaul86 · #31 01-20-2010, 01:24 PM

Haha I sure have Brian! Rep it! Lol

And as far as protech's go, you can call up protech and order it through them if you wish, that way you can decide what options you want on the rack. They have 2 different styles. Mesh and louvered. Then they have options for sliding back windows, light mounts, lumer stops, brackets for LEDs.. So it's almost better to go through them to decide exactly what you want. I will tell you this though, be prepared to drop a lot of money on one if you order it through them. They're spendy. I recommend craigslist. I picked my rack up for $55, and only had to modify it just a lil to fit. Much better than paying $400+!

Coil overs can be added to stock suspension with the brackets from ORW for both stock and superlifted trucks. The RCD is the original coil-over lift and everything came with the kit, but the kit is no long made anymore, unless you buy it used.

2007BlackFX4 · #32 01-20-2010, 06:26 PM

Quote:

Originally Posted by TrePaul86

Haha I sure have Brian! Rep it! Lol

And as far as protech's go, you can call up protech and order it through them if you wish, that way you can decide what options you want on the rack. They have 2 different styles. Mesh and louvered. Then they have options for sliding back windows, light mounts, lumer stops, brackets for LEDs.. So it's almost better to go through them to decide exactly what you want. I will tell you this though, be prepared to drop a lot of money on one if you order it through them. They're spendy. I recommend craigslist. I picked my rack up for $55, and only had to modify it just a lil to fit. Much better than paying $400+!

Coil overs can be added to stock suspension with the brackets from ORW for both stock and superlifted trucks. The RCD is the original coil-over lift and everything came with the kit, but the kit is no long made anymore, unless you buy it used.

thanks for all the help man. i found a 5" RCD Coil over suspension that my local truck shop will install for $2600. I'm not ready to dump that much into it tho. i think im gonna go with just a 3" PA Body lift

TrePaul86 · #33 01-20-2010, 06:34 PM

Well before I knew my buddy with the shop, I had no way to install it, otherwise I would have done it myself.

But I had a hook up on everything. I did the body lift with gap guards, the RCD with install and 315 Hankook's mounted and balanced for $3,400 cash and I was on the road in 2 days. You can achieve the same results (almost the same height as RCD) with the superlift and ORW coil brackets with Fox CO's and coils for just under $2k I think..

AngerRanger · #34 01-20-2010, 06:36 PM

Quote:

Originally Posted by mossyoak03

dam nice truck

TrePaul86 · #35 01-20-2010, 06:41 PM

Marcus' tow hooks like they're throwing up gang signs! haha I love givin him crap for it!

Needs to raise that rear hitch too! But it does look good!

2004xlmiller · #36 12-12-2011, 10:54 AM

revival with the captains beast

lrwfx4 · #37 12-12-2011, 05:32 PM

3" BL 33x12.50 BFG's T-Bar crank and shackles

Ranger_EDGE · #38 12-12-2011, 05:43 PM

3.5 inch spindle lift with 3 inch shackles in the rear on 32x11.50 on 15x8 eagle alloys

me and pops bronco ll lifted on a 3 inch suspension lift

FFparker · #39 12-12-2011, 05:43 PM

Quote:

Originally Posted by lrwfx4

3" BL 33x12.50 BFG's T-Bar crank and shackles

Good looking truck

lrwfx4 · #40 12-12-2011, 06:06 PM

Quote:

Originally Posted by FFparker

Good looking truck

Thanks

FFparker · #41 12-12-2011, 06:10 PM

My truck envys ranger_edge

Mikerider · #42 12-12-2011, 06:11 PM

I can finally post my truck in this thread, superlift with no tbar crank and expo leafs out back

JGiddy · #43 12-12-2011, 07:29 PM

Uploaded with ImageShack.us

deerchser · #44 12-12-2011, 08:19 PM

My turn.

3" PA body lift, t-bar crank, 33x9.5 BFG MT mounted on ProComp Rock Crawler 15x8's.

Damn, I need to get in the hills and take some new pics.

wyman00 · #45 12-12-2011, 09:30 PM