Quote:
Originally Posted by bigfisher
What did you do to remove the old ones?
Sent from my DROID X2 using FRF App
|
I carefully used a small flat head screw driver and was able to get a corner up. Then just pulled from there. They broke in half on both fenders, but they were trash anyway. Then I just used goo gone to get the adhesive remains. Since mine is black, you could see were the old Ranger was (hangs a little lower than the new block style). Hit it with some cutting compound and it took care of that
Then just alcohol and stick on. They used alignment pins so you can't screw it up.
The tailgate was a little more involved. I had to grind off the alignment pins first. Then took a bunch of measurements. The center point of the ford oval and the Ranger are the same height, and the outer edges are equidistant from the tailgate sides.
Hope this helps ya out Brandon!