Rangers With Camper Shells/Topper Thread - Page 100

RSCblow · #**1486** 11-07-2014, 01:52 PM

Did I miss anything cool, seems like I havent been on this thread for a while, PK got any new crazy plan? :P

brxxxck · #**1487** 11-07-2014, 02:02 PM

Quote:

Originally Posted by theplowboy

I used 4 on mine but I don't have side windows

Perfect! I might pick up some cans when I have a day off this week. I have to drop my bumpers anyway to re-paint those so it'll be a good time to do the rockers. Anyone got any tips for doing those? Or for taking old dip off?

RSCblow · #**1488** 11-07-2014, 02:29 PM

A lil sanding to help the paint bite.

theplowboy · #**1489** 11-07-2014, 03:02 PM

Old dip I just peel off and spot I could get to I hose down with WD 40 it rubs right off

LiveLifeChill · #**1490** 11-07-2014, 05:21 PM

Wasn't sure where to put this, so I'll toss it up here. I scored a free swing arm off a rodeo at school today. The mounting brackets are no where near what they need to be for the truck, so the plan is to cut those brackets off and make new ones. I'm thinking 1/8" steel L brackets with some type of barrel hinge on it. The bracket would bolt in above the latching mechanism for the tailgate and another above the mount for the bottom of the tailgate. The bracket will come out and over the taillight and below it. The will extend out far enough to give clearance to the tailgate. Thoughts? I need it to be able to hold the weight of the swing arm itself, a full size spare and a trasharoo with a load of firewood in it. Open to opinions and advice. Thanks.

pk9298 · #**1491** 11-07-2014, 08:20 PM

Quote:

Originally Posted by RSCblow

Did I miss anything cool, seems like I havent been on this thread for a while, PK got any new crazy plan? :P

lol hi, nothing to wild yet, been so busy I kinda forget that I drive a ranger some days. You can only do so much with a topper. And can only do so much in a 6'x5' bed.

----------

Quote:

Originally Posted by LiveLifeChill

Wasn't sure where to put this, so I'll toss it up here. I scored a free swing arm off a rodeo at school today. The mounting brackets are no where near what they need to be for the truck, so the plan is to cut those brackets off and make new ones. I'm thinking 1/8" steel L brackets with some type of barrel hinge on it. The bracket would bolt in above the latching mechanism for the tailgate and another above the mount for the bottom of the tailgate. The bracket will come out and over the taillight and below it. The will extend out far enough to give clearance to the tailgate. Thoughts? I need it to be able to hold the weight of the swing arm itself, a full size spare and a trasharoo with a load of firewood in it. Open to opinions and advice. Thanks.

pics? So basically a tire gate?

LiveLifeChill · #**1492** 11-07-2014, 09:52 PM

No not really a tiregate, the tailgate will still be there?

RSCblow · #**1493** 11-07-2014, 09:55 PM

So it open in the middle but swivel on each sides?

TB-9862 · #**1494** 11-08-2014, 02:03 AM

I think he's talking about a regular swing-away tire carrier like this:

unnamed (6).jpg

but instead of mounting on the outside corner he wants his brackets to attach to the inside wall where the tailgate hinge and latch are located.

I want to get a tire carrier like that for mine as well, never thought of mounting it there. Only think I can say is that the bed might warp since its just sheet metal, but I guess the area around the tailgate is a little stronger. I'm curious to see how this pans out...

brxxxck · #**1495** 11-08-2014, 11:01 AM

Idk man, that seems like a cool idea but I'm in and out of my cap too much to want another thing I have to unlock and move. The T locks are annoying enough to me.

If I was going to do something like this I'd probably adapt a hitch mounted bike rack that has one of those brackets at the bottom that lets it drop the same direction as your tailgate. Plus that way it wouldn't Have to be on 24/7.

LiveLifeChill · #**1496** 11-09-2014, 12:45 PM

Quote:

Originally Posted by TB-9862

I think he's talking about a regular swing-away tire carrier like this:

Attachment 119510

but instead of mounting on the outside corner he wants his brackets to attach to the inside wall where the tailgate hinge and latch are located.

I want to get a tire carrier like that for mine as well, never thought of mounting it there. Only think I can say is that the bed might warp since its just sheet metal, but I guess the area around the tailgate is a little stronger. I'm curious to see how this pans out...

That's exactly where I was going with that. Haha and I figure the area inside the tailgate is strong enough to support all the weight you can put on it so why wouldn't that same area support a tire swing arm. I may just use the existing bolts from the tailgate mounts. I think I'm just gonna buy some strap hinges and modify those.

stephen · #**1497** 11-09-2014, 01:28 PM

I've been wanting a carrier like that for so long. But if I put one on my truck i won't fit in my garage.

LiveLifeChill · #**1498** 11-09-2014, 01:34 PM

It's looking like I'm going to go through with it. Does anyone have any suggestions for the bracket and should I just let it be metal on metal or is there a spacer I should put in between the tire carrier and the barrel part of the hinge?

shawn_house102 · #**1499** 11-09-2014, 01:58 PM

Quote:

Originally Posted by LiveLifeChill

It's looking like I'm going to go through with it. Does anyone have any suggestions for the bracket and should I just let it be metal on metal or is there a spacer I should put in between the tire carrier and the barrel part of the hinge?

Something rubber so it didn't rub then rust. get an old bike tube and cut a circle in it.

LiveLifeChill · #**1500** 11-09-2014, 03:31 PM

Well I was thinking some sort of rubber washer like that, but I'm worried that may be a failure point when the weight is applied.