Quote:
Originally Posted by Baller
I have the WheelsNparts spindles and they are pressed in.
|
Re opening this old thread. I purchsed back on 2014 my wheelsnparts spindles 3” from eBay. And about yestarday 03/08/2018 the spindle shaft broke off getting off my driveway. I did not do any offroad. I purchased them to get bigger tires in 265/75/16 (they fit with enough space without spindles). However left side spindle shaft was shattered dont know why?
.
I took my truck to get the new disks, technician might torqued to much driver side nut. Not sure. Anyways, im glad it did broke outside home and not going on a curve at 55 mph.
I will try to contact wheelsnparts representatives to get a replacement since they state parts have warranty.
Here is a picture of it.
Hope this helps someone new to spindle lift (4x2 2wd edge w/t-bars) spindle was pressed in...
https://scontent.ftij3-1.fna.fbcdn.n...d9&oe=5B4B665E
https://scontent.ftij3-1.fna.fbcdn.n...1c&oe=5B00A3A9
https://scontent.ftij3-1.fna.fbcdn.n...9b&oe=5B426211