Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 03-18-2012, 12:42 PM
wparks wparks is offline
Learning to use the forums
 
Join Date: Mar 2012
Posts: 2
Default broken motor mound causing frivetrain vibration

I have a '95 ext cab 3.0L 4x2 with a bad drive train vibration. The truck has a broken driver side motor mount. The motor mounts listed by Ford and the after market suppliers do not fit the truck. Please see attached picture. The old mount is on the left with the new on the right. As you can see from the picture the old mount pins are at a 45 degree angle to the mount side while the new mount pins are parallel to the side.

I found that a '94 4.0L mount for the drivers side fit, but the same year passenger side still did not fit. All told the dealer and after market suppliers have sent 3 sets but still no luck.

Has anybody run into this and if so did they ever find the right mount? Any information would be appreciated.
Attached Images
File Type: jpg motor_mount.jpg (36.8 KB, 10 views)
__________________
'95 ext cab 3.0L 4X2
Reply With Quote
Reply

Tags
drivetrain vibration, motor mount

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
A/C Compressor causing engine bog down Kevinr6969 General Tech 10 07-22-2012 04:27 PM
PCV causing slow oil leak? Acroma General Ford Ranger Discussion 0 01-17-2012 07:12 PM
What causing this Fadil13 General Tech 2 08-05-2011 12:06 PM
Is my IAC valve causing all my problems with my 2.3? stephano 4-Cylinder Tech 8 04-15-2011 08:17 PM
2010 Gremlin causing stalling macgyver 4.0 SOHC / 4.0 OHV Tech 0 03-24-2010 12:33 PM