i want to lift my rear up some more. it has a HUGE cali lean and i already have lift shackles set a 2inchs and its still racking. i want a little cali lean like a 1inch or so lower then the front. not 3inchs. now would any leaf spring i pull out of a truck at a j.y work? lets say a expo and i grab the small leaf on both sides then slide it in mine. would that work?

__________________
-1995 ford ranger prerunner, 4.0, 4x4, 5-speed, 62k original miles, 2.5 radflo bypass front and 2.5 radflo triple bypass rear, deavers f23, 4.56 gears front and back, 07 seats, 07 mirrors, 35x12.50 bfg a/t, 4" fiberwerk glass front and rear, eagle alloy rims, 6k hid heads, two 8k hid off road lights, 34" led light bar, bed/roll cage/engine cage, 25 gallon fuel cell, cut and extended beams/radius arms
-2000 ford SVT f150 lightning -SOLD Lifted 2001 Ford Ranger EDGE, April's 2012 TOTM

Yea, as long as they're 2.5" long and 2-3 inches shorter than your main leaf, you'll be fine. Stick with a leaf around .25-.5 inches thick. It'll give you about 1-2 inches of lift. You will need longer u-bolts too, remember that.

__________________
1993 Ford Ranger Ext. Cab | stepside | 4x4 | 4.0L | Lifted | 35" BFG KM2s | MT Classic IIs | Dana 35/Disc 8.8 with 4.56's | Duals | Etc

RIP JASON

thanks you. and ill try and find a ranger out there with longer u-bolts on a 7.5 and put those in my pocket lol but i have about a good inch of thread or more on my u-bolts right now. is that cutting it to close?

__________________
-1995 ford ranger prerunner, 4.0, 4x4, 5-speed, 62k original miles, 2.5 radflo bypass front and 2.5 radflo triple bypass rear, deavers f23, 4.56 gears front and back, 07 seats, 07 mirrors, 35x12.50 bfg a/t, 4" fiberwerk glass front and rear, eagle alloy rims, 6k hid heads, two 8k hid off road lights, 34" led light bar, bed/roll cage/engine cage, 25 gallon fuel cell, cut and extended beams/radius arms
-2000 ford SVT f150 lightning -SOLD Lifted 2001 Ford Ranger EDGE, April's 2012 TOTM

best to just buy new ubolts, i wouldnt trust old rust jy ones. you can also buy a new rear block/u-bolt kit.. just sayin.

__________________
http://treadlightly.org/quick-tips-f...four-wheeling/

where at? link. going to a 3inch block instead of the 2.5?

__________________
-1995 ford ranger prerunner, 4.0, 4x4, 5-speed, 62k original miles, 2.5 radflo bypass front and 2.5 radflo triple bypass rear, deavers f23, 4.56 gears front and back, 07 seats, 07 mirrors, 35x12.50 bfg a/t, 4" fiberwerk glass front and rear, eagle alloy rims, 6k hid heads, two 8k hid off road lights, 34" led light bar, bed/roll cage/engine cage, 25 gallon fuel cell, cut and extended beams/radius arms
-2000 ford SVT f150 lightning -SOLD Lifted 2001 Ford Ranger EDGE, April's 2012 TOTM

ordered a add-a-leaf of summit. should hopefully give me a inch and no more. if so ill lower the shackles down a inch.

__________________
-1995 ford ranger prerunner, 4.0, 4x4, 5-speed, 62k original miles, 2.5 radflo bypass front and 2.5 radflo triple bypass rear, deavers f23, 4.56 gears front and back, 07 seats, 07 mirrors, 35x12.50 bfg a/t, 4" fiberwerk glass front and rear, eagle alloy rims, 6k hid heads, two 8k hid off road lights, 34" led light bar, bed/roll cage/engine cage, 25 gallon fuel cell, cut and extended beams/radius arms
-2000 ford SVT f150 lightning -SOLD Lifted 2001 Ford Ranger EDGE, April's 2012 TOTM

call 4wheelparts.

__________________
http://treadlightly.org/quick-tips-f...four-wheeling/

Dont ever re-use u-bolts. When torqued down properly, they stretch, in turn making them weak/brittle ones they are removed. You can never torque them down properly again. They WILL break and you'll be up shit creek.

Also, dont forget you'll need new center bolts.

__________________
1993 Ford Ranger Ext. Cab | stepside | 4x4 | 4.0L | Lifted | 35" BFG KM2s | MT Classic IIs | Dana 35/Disc 8.8 with 4.56's | Duals | Etc

RIP JASON

it comes with new center bolts. and u-bolts I'm going to go to a local 4x4 shop we have in town and have me makes some.

__________________
-1995 ford ranger prerunner, 4.0, 4x4, 5-speed, 62k original miles, 2.5 radflo bypass front and 2.5 radflo triple bypass rear, deavers f23, 4.56 gears front and back, 07 seats, 07 mirrors, 35x12.50 bfg a/t, 4" fiberwerk glass front and rear, eagle alloy rims, 6k hid heads, two 8k hid off road lights, 34" led light bar, bed/roll cage/engine cage, 25 gallon fuel cell, cut and extended beams/radius arms
-2000 ford SVT f150 lightning -SOLD Lifted 2001 Ford Ranger EDGE, April's 2012 TOTM

Whats wrong with a little cali lean?? Post Pictures when you get them on!

__________________
GOLDIE
1999 2.5L XLT
Herculiner | Kobalt tool box | K&N Filter | 6k HID's | 31's BFG | Eagle Alloy 186s | 102'' Whip | Cobra 19 DX IV | Fabtech 3.5 Spindles | Pro Comp AAL kit | 15% Tint | Mustang Dome

oopps never saw this post from you ffparker. got them on yesterday. and the rear was redicoulsy high. look like it was matting season for the ranger lol so i took it down a inch on the shackles and it was still way to high. so i threw 7 sand bags in the rear. still way to high so i took the lift shackles off and put the stock shackles back on and it sits exactly where i wanted it. a little lower in the rear. i love the cali lean!! i can't sit in a truck that makes me feel like I'm leaning over the steering wheel.

__________________
-1995 ford ranger prerunner, 4.0, 4x4, 5-speed, 62k original miles, 2.5 radflo bypass front and 2.5 radflo triple bypass rear, deavers f23, 4.56 gears front and back, 07 seats, 07 mirrors, 35x12.50 bfg a/t, 4" fiberwerk glass front and rear, eagle alloy rims, 6k hid heads, two 8k hid off road lights, 34" led light bar, bed/roll cage/engine cage, 25 gallon fuel cell, cut and extended beams/radius arms
-2000 ford SVT f150 lightning -SOLD Lifted 2001 Ford Ranger EDGE, April's 2012 TOTM

Haha I can understand that. But what about the pictures!?

__________________
GOLDIE
1999 2.5L XLT
Herculiner | Kobalt tool box | K&N Filter | 6k HID's | 31's BFG | Eagle Alloy 186s | 102'' Whip | Cobra 19 DX IV | Fabtech 3.5 Spindles | Pro Comp AAL kit | 15% Tint | Mustang Dome

one sec uploading them

----------

ok here they are.

pics here show it at one inch on the shackle settings. to high for my taste. a lot of people liked it like this but i couldn't stand it






where i love it at

__________________
-1995 ford ranger prerunner, 4.0, 4x4, 5-speed, 62k original miles, 2.5 radflo bypass front and 2.5 radflo triple bypass rear, deavers f23, 4.56 gears front and back, 07 seats, 07 mirrors, 35x12.50 bfg a/t, 4" fiberwerk glass front and rear, eagle alloy rims, 6k hid heads, two 8k hid off road lights, 34" led light bar, bed/roll cage/engine cage, 25 gallon fuel cell, cut and extended beams/radius arms
-2000 ford SVT f150 lightning -SOLD Lifted 2001 Ford Ranger EDGE, April's 2012 TOTM

Looks Awesome man!! Love your truck. I don't really see much lean till the last pic. looks fairly level. Still sexy anyways

__________________
GOLDIE
1999 2.5L XLT
Herculiner | Kobalt tool box | K&N Filter | 6k HID's | 31's BFG | Eagle Alloy 186s | 102'' Whip | Cobra 19 DX IV | Fabtech 3.5 Spindles | Pro Comp AAL kit | 15% Tint | Mustang Dome

i want to do this mod! so baddd, what did u end up taking it out of?

----------

oh and pics of it "too high" please?

----------

just saw the one inch ones yeah, on a regcab it seems a little bit high but on a edxt cab i bet it would be sexxxy as fuck

__________________
Ford Ranger Edge Supercab, 2004 3.0 Auto, 2WD, 4.10 Axle 31x10.5x15 BF Goodrich All Terrain T/A KO's


My Truck Is My Mountain Bike's Ride!

Class III hitch, Rhino Bedliner, Almost Maxed T-Bar Crank, Tuff Country Add A Leaf, Custom Low Anchor Points, OEM ('99) Tow Hooks, Pro Comp Offroad Lights , Mustang Dome Light, Clear Corners, Slim Toolbox, Blinker Mod,Cargo Brake Light Mod,Expo Lighted Visors, Ultra Silverstar heads/fogs, Fog/high mod, Reverse/switched lights, Bike Fork Mounts