Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 05-08-2011, 06:50 PM
95fordman 95fordman is offline
Ford Truck Driver
 
Join Date: Jan 2011
Posts: 97
Default unlevel

ok guys when i bought my ranger the rear had a lil bit of lift i would like to level the front with the rear but im not sure if the t bars are maxed out. how can you tell? i know the front sits around 3" lower than the rear. thanks guys
__________________
1999 ford ranger x cab 4x4 flow masters 3" rear blocks 31x10.50 bfg ats. 2 12" kicker cvx's, 6.22 cubic foot ported box, hifonics 1500 watt class d mono wired 1ohm
Reply With Quote
  #2  
Old 05-13-2011, 10:00 PM
Toaster Toaster is offline
Learning to use the forums
 
Join Date: Mar 2011
Posts: 14
Default Re: unlevel

Its a truck, it is made like that so when you put weight in the back, you don't look like a Mexican with cut springs.
Reply With Quote
  #3  
Old 05-13-2011, 10:17 PM
HazardousRanger HazardousRanger is offline
Hazardous to Your Health!
 
Join Date: Jan 2011
Posts: 9,995
Default Re: unlevel

^^ ignorant idiot. and a racist.

just look at the bolts , how far cranked are they? a good measure is...are they past the "plate" that holds the bars?
__________________
Ford Ranger Edge Supercab, 2004 3.0 Auto, 2WD, 4.10 Axle 31x10.5x15 BF Goodrich All Terrain T/A KO's


My Truck Is My Mountain Bike's Ride!

Class III hitch, Rhino Bedliner, Almost Maxed T-Bar Crank, Tuff Country Add A Leaf, Custom Low Anchor Points, OEM ('99) Tow Hooks, Pro Comp Offroad Lights , Mustang Dome Light, Clear Corners, Slim Toolbox, Blinker Mod,Cargo Brake Light Mod,Expo Lighted Visors, Ultra Silverstar heads/fogs, Fog/high mod, Reverse/switched lights, Bike Fork Mounts
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search