Originally Posted by blkranger231
You want to measure eye to eye on the mounting points of the shock. Take the old shock out lift one side up till you get to the bumpstop (col length) and measure then on the otherside it will be at full droop measure eye to eye there (ext length).
got it, good looking out. ill post some pics when its all done.
2002 ford ranger edge 3.0 step cab with 2.0 fox shocks in front stock in back. 4'' front body lift with 3'' spindle lift torsion bars torqued at 1.5'' 4'' rear body lift. flowmaster exhaust 35"remington mudd brute tires 5 speed manual transmition with k&n air filter 2 wheel drive 4.56 rear geared with a 7.5 diff front bullballr with hella 500 offroad lights two pro comp tow hooks in the front and the back