Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 02-27-2011, 05:35 PM
hogvibrator hogvibrator is offline
Learning to use the forums
 
Join Date: Aug 2010
Posts: 5
Default ball joints

02 ranger,2wd.can i change the upper balljoints or do i have to buy the hole a arm?
Reply With Quote
  #2  
Old 02-27-2011, 06:30 PM
klinger86 klinger86 is offline
Ford Ranger Driver
 
Join Date: Jan 2011
Posts: 2,970
Default Re: ball joints

i know in my 98 i could change the upper ball joints. and from what i can tell from a quick glance online you should be able to do yours aswell. although if i were you while i was changing the upper i would go ahead and change the lower aswell. if for nothing else to save you from having to tear it all back apart again when you need to change the lower.
Reply With Quote
  #3  
Old 02-27-2011, 06:47 PM
Teg360 Teg360 is offline
Ford Tough
 
Join Date: Feb 2011
Posts: 466
Default Re: ball joints

you have to buy the whole arm
__________________
2002 Ranger Xlt Ext. Fx4
Mods: AEM Brute Force air intake, Throttle body spacer, dual exhaust, leveling kit, 3in body lift, 15x8 black pacer rims wrapped with 33x12.5xr15 Goodyear Wrangler Duratracs, Hella 500 offroad lights, cobra cb with wilson 1000 antenna, Sony head unit, 500 watt amp with 12inch sub.
Quote:
Originally Posted by Ranger Sport View Post
Baby steps.
I think we made good progress today.
Reply With Quote
  #4  
Old 02-27-2011, 06:48 PM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,399
Default Re: ball joints

Buy the Moog one so you can replace just the ball joint in the future.
__________________
2005 Edge

Reply With Quote
  #5  
Old 02-28-2011, 07:28 PM
hogvibrator hogvibrator is offline
Learning to use the forums
 
Join Date: Aug 2010
Posts: 5
Default Re: ball joints

thanks,i will do upper & lower.
Reply With Quote
  #6  
Old 02-28-2011, 10:13 PM
spacepine spacepine is offline
Learning to use the forums
 
Join Date: Sep 2010
Posts: 8
Default Re: ball joints

Check out http://www.rockauto.com/ You may or may not be able to just replace the ball joint. I found just the upper ball joint for a 2002 Ranger 3.0 flex fuel (don't know what engine you have). They just might have what you're looking for. Good luck.

P.S.

Be careful if you decide to heat the old ball joints. My cousin just told me how he almost dead from an exploding ball joint. What happened was he was heating the upper ball joint (I think it was upper) with a torch. The ball created an air tight seal inside the joint. The grease inside expanded and blew the ball out. He said it sounded like dynamite. Can't remember what it hit under his truck but he said it shifted it and eight of an inch (metal flange or something) bounced of that thing and dented the wall. It happened to quick for him to get scared or jump. Said it almost hit his head/face.
__________________
1999 Ford Ranger XL Regular Cab 3.0L V6 EFI
Mods
AVM Manual Locking Hubs,Thrush Performance Muffler, Zip Tie on Throttle Cable, Pioneer CD/mp3 Player, Pioneer 3way 6"x8"s front, Kicker 2way 5-1/4"s rear

Last edited by spacepine; 03-01-2011 at 06:25 AM.
Reply With Quote
  #7  
Old 03-10-2011, 06:25 PM
MoundLiferanger204 MoundLiferanger204 is offline
Liking the Ford Ranger Forum
 
Join Date: Feb 2011
Posts: 16
Default Re: ball joints

USE MOOG PRODUCTS! fit quality and all around better product wish i woulda bought em!
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
I need Ball Joints! EMB1230 Suspension Tech 1 01-03-2011 01:30 AM
Ball Joints ecogenie 4-Cylinder Tech 2 12-03-2010 08:09 PM
ball joints druwevr Suspension Tech 0 10-02-2010 03:37 PM
Ball Joints tunafish25 Suspension Tech 4 06-06-2010 03:53 AM
are my ball joints going out? wozron Suspension Tech 1 05-09-2010 12:55 PM