|
12-12-2010, 07:13 PM
|
Like the Forums
|
|
Join Date: Nov 2010
Posts: 40
|
|
how the heck do i fix this
my truck is sitting up higher in the back and it seams to have came from the factory that way but i cant stand it its so ugly! whats the most cheap and easy way to fix this so my truck is level???
|
Register and never see these ads again. |
|
12-12-2010, 07:16 PM
|
|
I love my truck
|
|
Join Date: Sep 2010
Posts: 1,528
|
|
Re: how the heck do i fix this
Depends on your truck
Crank your t-bars, if you have them; click here for more info>>> http://www.fordrangerforum.com/exter...sion-bars.html
__________________
2002 Mazda B3000 3.0L V6 4X4 | 2010 F-150 | 1990 Jeep Commanche 4.0L |
Mods:
off road lights | back up lights | auxiliary bed lights | interior LEDs | rhino liner | John Deere mudflaps | fog light mod | air box mod
Mustang dome light | Explorer OHC | Rampage LED brakestrip | maxed t-bars | Dixie horn | painted interior accents | undercoating | Cooper Discoverer AT3s
Mods to come: louder exhaust
Last edited by 02maz; 12-12-2010 at 07:20 PM.
|
12-12-2010, 07:24 PM
|
I'm a sell out
|
|
Join Date: Jan 2010
Posts: 2,299
|
|
Re: how the heck do i fix this
I don think you have T bars. You could put some coil spacer in to bring the front up a bit.
__________________
SOLD: 2005 Ranger EDGE+ Supercab (2dr) 4x2
SOLD: 2007 Dodge Ram 1500 QC 5.7 HEMI
CURRENT: 2015 Tacoma DCLB TRD Sport
|
12-12-2010, 07:28 PM
|
Like the Forums
|
|
Join Date: Nov 2010
Posts: 40
|
|
Re: how the heck do i fix this
yeah i have no t bars on a 96! i didnt want to go any higher i wanted to lower the back !
|
12-12-2010, 07:39 PM
|
|
Ford Ranger Driver
|
|
Join Date: Dec 2009
Posts: 2,571
|
|
Re: how the heck do i fix this
Take out the lift block in the rear. You may need new U-Bolts though.
__________________
2002 XLT 4X4
Auto 4.0L SOHC
8.8 w/ 4.10 L/S
Mods: Xcal 2, K&N Drop-In, Line-X, DSG Heads/Corners, 6000k Hi/Low HID's, 6K HID Fogs, Foglight Mod, Throttle Cable Mod, 6.5" Digital Designs, Rockford P400.4, 2 Sundown SA-15's, MB Quart DSC 2000.1d, Cranked T-Bars, 285/75/R16 Nitto Terra Grapplers
|
12-12-2010, 08:18 PM
|
Banned
|
|
Join Date: Sep 2009
Posts: 3,005
|
|
Re: how the heck do i fix this
unless its a 4x4, i dont think its got a lift block. you could flip your shackles, wich would lower the back about 2 inches, or get lift coils or spacers for the front
|
12-12-2010, 08:28 PM
|
|
Ford Tough
|
|
Join Date: Jan 2010
Posts: 412
|
|
Re: how the heck do i fix this
Just throw a fat kid in the bed
__________________
'94 Single Cab 4cyl 5spd
Still in the parts collecting stage for a 2.3t swap
Old:
1999 F150 ext cab 4.6 4x4--Totalled
1995 F250 ext cab long bed 7.3 4x4--Sold
1999 Ranger ext cab 3.0 2wd--Sold
|
12-12-2010, 11:43 PM
|
Like the Forums
|
|
Join Date: Nov 2010
Posts: 40
|
|
Re: how the heck do i fix this
It's a 2 wheel drive and I don't think there is any blocks on there rear end . Where would it be ? Inbetween the leaf and the rear end ? Or there the leavsprings meet the bed ?
|
12-12-2010, 11:49 PM
|
Banned
|
|
Join Date: Sep 2009
Posts: 3,005
|
|
Re: how the heck do i fix this
between the leaf and the axle
|
12-13-2010, 12:21 AM
|
|
Turd Generation Ranger
|
|
Join Date: Jan 2010
Posts: 2,972
|
|
Re: how the heck do i fix this
Airbags are your only solution.
__________________
1997 Ford Ranger 2.3L
It's lowered and stuff.
My Build Thread
|
12-13-2010, 02:46 AM
|
|
...............
|
|
Join Date: May 2009
Posts: 23,399
|
|
Re: how the heck do i fix this
Next time please post all info on the truck. That would have made this a lot easier for people to help you out.
From all we knew it was possibly a 96 green truck
__________________
2005 Edge
|
12-13-2010, 03:52 PM
|
Like the Forums
|
|
Join Date: Nov 2010
Posts: 40
|
|
Re: how the heck do i fix this
its a 1996 xlt single cab 2 wheel drive 4 cylinder i was just told i could put the bottom over load leafspring on top rather then on the bottom and it should flatten them out enough to be level ? wont this make my truck bounce alot in the back ? i dont really haul much so i dont need the support if i would lost any
|
|
|