Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 09-30-2018, 12:06 PM
Southernman0001 Southernman0001 is offline
Learning to use the forums
 
Join Date: May 2017
Posts: 1
Default Need shocks help please

Trying to replace the factory shocks (number on the front shocks 1L54-18045-CA P2274A) and keep running into the same top mount issue on all the exact fit offerings I find. My shocks have a A shape (for lack of a better description) bushing that slides into the top mount of the truck along with the shaft of the shock. Without it the hole is too large for the shock shaft. The best I can tell from pictures it looks a lot like a motorcraft insulator AD950. It also looks like pictures of Motorcraft shock ASH1094, which says it is not an exact fit for my truck. My vin is IFTYR10U03PA40754. Any suggestions?
Thank you, Ricky
Sorry, I had that shocks number wrong.
1L54-18045-CA Front shocks
1L54-18080-EC Rear shocks
__________________
2003 3.0 v6 Edge Std cab 2WD Torsion Bar

Last edited by Southernman0001; 10-01-2018 at 06:26 PM.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Coilover rear shocks - which new shocks? attworth Suspension Tech 5 11-25-2012 06:08 PM
Some new shocks!!! Ranger01 Vehicle Snapshots 1 07-19-2012 09:28 PM
edge shocks or standard shocks pooleo Drivetrain Tech 2 03-22-2011 11:55 AM
xlt shocks vs edge shocks justintherider Suspension Tech 10 01-20-2010 06:33 PM
Rear air shocks vs. gas shocks? 94_Ranger Suspension Tech 2 02-16-2009 04:53 PM