A few months ago I got an 8.8 from an Explorer, 4.10s and limited slip, and got some perches welded on by a friend. The perches I got added 1/2 inch of lift roughly, which boosted the rear even more than it already was with a 4 inch lift, so I decided to get some Explorer leafs to remove some height and also the lift block.
The first picture is how the truck looked before.
The next three are comparing my ranger springs with the explorer one, with and without lift blocks.
The last picture is how it sits with the explorer leafs and stock blocks.
It was a pretty easy swap since all my bolts came out, but I've now figured out that my shackle doesn't move. The bushing must be seized with the bolt.
Should I add a leaf from my ranger pack to the explorer one or do the belltech shackles? Thanks guys
Sent from my HTC 10 using Tapatalk