Hello everyone , I would like some advice on how to make the rear of my 04 xlt ranger 4x4 level with the front since im not looking for a lift and adding bigger tires.

__________________

Flipping the hangers in the rear. I heard its like a 2+ inch drop so...I dont know if youd be level then. Dont know what your current difference is

__________________
'00 Ranger, supercab, flareside, 2wd, 3.0, auto, 3.73 open, Bilstein 4600s, 31x10.5x15 BFGs, 15x8 procomp 152s

You can always crank your bars to bring the front up like an inch.

__________________
2007 Regular Cab - 2.3 DOHC - 5 Speed Auto - 4.10 Gears - Maxtrac 7" Lift - Fiberwerx 3" Fenders - Bilstein 5100 Series - 15x10 Ultra 164's - 35x12.50x15 Red Letters - Custom dents

he said no lift

__________________
2000 Ford Ranger XLT 2WD ~ Work-In-Progress: 5.0 V8, M5R2 5 Speed, 4" Suspension Lift, 3" Body Lift, 33" BFG's, Bilstein 5100's, Comp Cams XE258HR-12, 24# Injectors, Torque Monster Headers, Flowmaster 70 Series,
1987 Ford F-150 Lariat 302 ~ Decommissioned
2006 Honda Civic LX 1.6 ~ Totaled
2011 Acura TSX K24 Base ~ Daily Driver, Supercharged 10PSI, 310whp 241lb/ft

Swap to a 08+ block on the rear axle.

__________________

Either this or remove your factory block and install beltech 6400 shackles in the 1" position.

__________________
2002 Blue Edge <-- Retired off road toy
3.0 Automatic, 2wd, 4:56's, 35x12.5 Kuhmo's, Lifted 2x, and more. TOTM July 2015
2002 Jeep TJ <-- NEW off road toy!
2.5L 5-spd, Skyjacker 4.5", 4:56's, Aussie Lockers, 33x12.5's, and more.
Build Thread --> http://www.fordrangerforum.com/proje...blue-edge.html
Youtube --> https://www.youtube.com/user/smashlizard