Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 05-19-2010, 08:23 PM
PUSH IT PUSH IT is offline
Learning to use the forums
Join Date: May 2010
Posts: 4
Default ( bushings ? ) anyone?

My question is about possible bushings wearing away at the outer shaft
The problem is the axle is being vibrated enough to destroy the splined washer that rides behind the retaining or C clip rendering it usless therefore I end up replacing the outer shaft and splined washer retaining clip etc.
I've been told there are bushings in the backside of the hubs.

Thanx, Jim.
I will be tearing it down Thursday I will take pics to show damage

I figured it out, I tore bad side apart ,Then I tore the pass side apart and found a bearing no kidding ! I found no damage to the shaft lucky me.
Black 1993 Splash reg cab stepside 4.0 5spd 4X4 3" body lift / 4" suspension lift springs in front / helpers & shackles out back with Homemade 3" lifts for Motor & Trans mounts

Last edited by PUSH IT; 05-21-2010 at 07:01 PM.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
M5OD shifter bushings replaced, no help! Clem Drivetrain Tech 3 03-05-2010 01:30 PM
Front Radius Arm Bushings Americantruckfleet Suspension Tech 4 02-19-2010 03:53 PM
Shifter Bushings Platinum Drivetrain Tech 6 02-16-2010 07:11 AM
Lower control arm bushings bad? Wicked46 Suspension Tech 3 11-12-2009 03:01 AM
Adjustable camber bushings for a 2000 xlt JMann Lowered Suspension 3 05-24-2009 09:39 AM