ok ive been switching back and forth for half a year now on what lift i want to do. if i can do it... a 3" fabtech spindle and a Belltech 6400 shackle. can i do the spindle lift on the front if i have a 4WD with torsion bars? also if i do that do i need to replace to larger shocks? any bad things from doing that lift?

__________________
2003 FX4 Off Road- 4.0L V6
fav. mod- cab clearance lights
-torsion bars maxed-

im wondering about the shocks because i jacked up my front end to see how it would look sitting 37 and a half inches in the air. when i did my shock look all weird. like the top cylinder looked like it was pulled off the bottom cylinder part of the shock.

__________________
2003 FX4 Off Road- 4.0L V6
fav. mod- cab clearance lights
-torsion bars maxed-

Spindle lift is for 2WD only. So no, the spindle lifts wont work with your truck.

__________________
2006 Ford Ranger Sport 4.0 2WD on 32x11.50R15s
-3" Doetsch Spindle Lift


Using the forum:
How to Post on the Forum
Creating a signature (do this before asking any questions)
Upload an Avatar (image of your Ranger)
How to Post Pictures on the Forum
Switch the site layout: Light Theme or Dark Theme

Things to do:
Participate in Truck of the Month
Participate in the Ranger Photo Contest
Participate in the Non-Automotive Photo Contest
Become a Site Contributor
Shop at the FordRangerForum.com Store

dam! so besides for torsion bar,and bl. suspension lift kit thats the only other way to raise my front.

__________________
2003 FX4 Off Road- 4.0L V6
fav. mod- cab clearance lights
-torsion bars maxed-

im wondering if i do a 2" tbar crank will it make my shocks more stretched out. im wondering because i jacked up my front end to see how it would look sitting up higher. when i did my shock looked all weird. like the top cylinder looked like it was pulled off the bottom cylinder part of the shock.

__________________
2003 FX4 Off Road- 4.0L V6
fav. mod- cab clearance lights
-torsion bars maxed-

anybody^^^^^^ bump

__________________
2003 FX4 Off Road- 4.0L V6
fav. mod- cab clearance lights
-torsion bars maxed-

you could use torsion bar keys to further elevate your crank on the front end.. but they say its bad for your balljoints and such.

__________________
2001 Ford Ranger Supercab (4dr), Oxford White, 4.0 Sohc, 4x4, Manual trans (hurst equipped), 4:10's, 3" body lift.

Your truck will look fine with your t-bars cranked all the way. Ur shocks will be fine too. If your running small tires the gap in the wheel well could look pretty funny.

__________________
2004 4WD XLT V6 4.0L, 4.10 Limited slip, 32 11.50' bfg KM2 MT, Tbars cranked, 3 inch body lift, Custom headache rack w/ warn 2500lb winch, rear fog's, and brake lights. MB motoring razor wheels.