Rough Country Leveling Coils 1.5 inches

SlayMudXLT · #1 10-10-2013, 09:55 AM

Hello Im sorry but im new to this site and it may be answered already. I have a 1994 xlt 4x4 4.0l v6 5 speed ranger. I am looking to buying the rough country leveling coils that will raise the fron about 1.5 inches, Do I need to buy new camber bushings? If so what kind and does anyone know the degrees I will need? Do they make adjustable camber bushings?

JLDANGER RANGER · #2 10-10-2013, 07:35 PM

I have that leveling kit. You don't have to have the bushings. I went ahead and changed mine bc I'm doing a larger lift later on. But no, you don't have to have them

Sent from my Android using FRF App

SlayMudXLT · #3 10-10-2013, 07:40 PM

[QUOTE=JLDANGER RANGER;1741095]I have that leveling kit. You don't have to have the bushings. I went ahead and changed mine bc I'm doing a larger lift later on. But no, you don't have to have them

Sent from my Android using FRF App[/QUOTE

Im looking to do only the leveling kit, Will not changing the bushings hurt when I try to get it aligned?

96_4x4_XLT · #4 10-10-2013, 07:41 PM

Quote:

Originally Posted by SlayMudXLT

..

You won't be able to align it

JLDANGER RANGER · #5 10-10-2013, 07:45 PM

Alignment shop said they didn't have to have them being only 1.5", but then again it would be easier if you got them. Twin I beams are hard to align I'm the first place

Sent from my Android using FRF App

96_4x4_XLT · #6 10-10-2013, 07:55 PM

1.5 coils with out bushings

SlayMudXLT · #7 10-10-2013, 10:22 PM

Quote:

Originally Posted by 96_4x4_XLT

1.5 coils with out bushings

So I do need the bushings? I definitely dont want it to look like that. With the rough country 1.5 inch leveling kit what bushings do you recommend? I have no idea

96_4x4_XLT · #8 10-10-2013, 10:31 PM

Quote:

Originally Posted by SlayMudXLT

So I do need the bushings? I definitely dont want it to look like that. With the rough country 1.5 inch leveling kit what bushings do you recommend? I have no idea

Yes you will

Just go to napa and get 2* camber bushings like $40 I think

SlayMudXLT · #9 10-11-2013, 07:57 AM

Quote:

Originally Posted by 96_4x4_XLT

Yes you will

Just go to napa and get 2* camber bushings like $40 I think

2 degree camber bushings? is there a way to know for sure which ones?

JLDANGER RANGER · #10 10-11-2013, 02:00 PM

Quote:

Originally Posted by SlayMudXLT

2 degree camber bushings? is there a way to know for sure which ones?

You really won't know until your down there, which is the bad thing. I got Moog bushings good for up to 4 degrees of adjustment, just to be safe. They were like $40 a piece though

traacer · #11 10-11-2013, 02:05 PM

just get 3* adjustables

JLDANGER RANGER · #12 10-11-2013, 02:11 PM

Quote:

Originally Posted by traacer

just get 3* adjustables

This

96_4x4_XLT · #13 10-11-2013, 09:48 PM

Quote:

Originally Posted by traacer

just get 3* adjustables

1.5 you really only need 2*

Unless you plan on going bigger in the future just get 2*

----------

Quote:

Originally Posted by SlayMudXLT

2 degree camber bushings? is there a way to know for sure which ones?

2* like I said -_-

----------

Quote:

Originally Posted by JLDANGER RANGER

You really won't know until your down there, which is the bad thing. I got Moog bushings good for up to 4 degrees of adjustment, just to be safe. They were like $40 a piece though

I think you should go over like 2 1/2* 3* is pushing it

SlayMudXLT · #14 10-12-2013, 11:57 PM

Quote:

Originally Posted by 96_4x4_XLT

1.5 you really only need 2*

Unless you plan on going bigger in the future just get 2*

----------

2* like I said -_-

----------

I think you should go over like 2 1/2* 3* is pushing it

i bought super lift adjustable ones max 2.25 degree

we_hoskins · #15 10-16-2013, 08:27 PM

I put 1.5 coils under the front of my 97, and went all the way up to 4degree bushings and it sill wouldnt align properly. Is there anything you can get to drop the twin i-beam to compensate the coil springs?