ive got the spindles and extended brake cables. I just need all the bolts and most importantly the steering stops! Send me some offers

__________________
08 Ford Ranger 2.3l

Shouldn't need extended brake cables or steering stops...I didn't use them when I spindle lifted with no problems.

__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.

Something tells me that your quest to save some money is going to COST you money in the end! On a spindle lift, a notch cut near the ball joint serves as your steering stop. (2" from the outside of the ball joint at the rear of the control arm.

Attached Images

Red Ranger Build 017.jpg (91.8 KB, 10 views)

Oh and as far as bolts go, the only thing you will need are new cotter pins if replacements were not supplied.

__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.

oh okay. i didnt know it could work that way. What size of cotter pin would i need? and where do you think i can get it?



my quest for saving is definetly saving me money. 4 fabtech shocks and spindles for 300$ and for the rest of the kit its like 96$ but now i guess i dont need everything.

__________________
08 Ford Ranger 2.3l

got my cotter pins at autozone...cannot recall the size, it was a few years ago now...

__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.

Are they the same size as the stock ones?

__________________
08 Ford Ranger 2.3l

yep

__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.

alright. hey i dont need a tie rod puller to pull out the tie rod right?

__________________
08 Ford Ranger 2.3l

I use a ball joint press to pop the ball joints and tie rods. Rented it from autozone for $10 or so.

__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.

alright alright. ima do that then. So happy that i have my spindles and i juss got an exhaust. omg yes ye syes

__________________
08 Ford Ranger 2.3l