|
10-08-2016, 08:39 PM
|
|
Learning to use the forums
|
|
Join Date: Sep 2016
Posts: 9
|
|
Fox 2.0x5 emulsion coilovers.
I have 2.0x5 fox emulsion coilovers for a coilover conversion for a stock height or body lifted torsion bar Rangers 2wd or 4wd. They were run on the truck for 4-5 months before I did a superlift and replaced them with longer coilovers. The shocks come with the extended lower eyelets not installed. The shocks will come with 10" 750# lbs eibach springs.
I'm asking $450 shipped for the coilovers. Post on here then pm me if your interested.
|
Register and never see these ads again. |
|
10-12-2016, 10:16 AM
|
|
2004 Ranger XLT
|
|
Join Date: Aug 2010
Posts: 2,309
|
|
Re: Fox 2.0x5 emulsion coilovers.
How much better is the ride quality when you convert to coil overs from shocks alone?
Do you have any pictures that you could post of them?
__________________
2004 black Ranger XLT- Sold
2004 Vista blue 2WD(custom paint job)Ranger XLT 4-door ext. cab with the 3.slow and auto trans black and blue FX4 Level II bucket seats with shorty console
2004 DSG FX4 with a 5R55E auto trans and 4:10 gears-Sold
2010 Redfire Metallic 2WD Ranger XLT,4-door ext. cab, 4.0 SOHC with auto trans, SLA front sus. traction control, Sirius Satellite radio and 3:55 gears
2003 red Ranger Edge 4X4, 4-door ext. cab -4.0 SOHC with a 5R55E auto trans
|
10-12-2016, 03:59 PM
|
|
Learning to use the forums
|
|
Join Date: Sep 2016
Posts: 9
|
|
Re: Fox 2.0x5 emulsion coilovers.
Quote:
Originally Posted by Fordfan444
How much better is the ride quality when you convert to coil overs from shocks alone?
Do you have any pictures that you could post of them?
|
I personally think that the ride quality greatly improved. The truck handles very well and that it smooths out the rough stuff to me any way.
|
10-14-2016, 09:23 AM
|
|
2004 Ranger XLT
|
|
Join Date: Aug 2010
Posts: 2,309
|
|
Re: Fox 2.0x5 emulsion coilovers.
They look nice ... I'm just wondering, do you have to weld any special brackets onto the frame prior to the installation?
__________________
2004 black Ranger XLT- Sold
2004 Vista blue 2WD(custom paint job)Ranger XLT 4-door ext. cab with the 3.slow and auto trans black and blue FX4 Level II bucket seats with shorty console
2004 DSG FX4 with a 5R55E auto trans and 4:10 gears-Sold
2010 Redfire Metallic 2WD Ranger XLT,4-door ext. cab, 4.0 SOHC with auto trans, SLA front sus. traction control, Sirius Satellite radio and 3:55 gears
2003 red Ranger Edge 4X4, 4-door ext. cab -4.0 SOHC with a 5R55E auto trans
|
10-14-2016, 12:59 PM
|
|
Ford Ranger Driver
|
|
Join Date: Feb 2012
Posts: 2,172
|
|
Quote:
Originally Posted by Fordfan444
They look nice ... I'm just wondering, do you have to weld any special brackets onto the frame prior to the installation?
|
You have to brace the factory shock tower. The bracket "kit" uses two pieces of strap to bridge from the shock tower to the frame
__________________
2002 Ford Ranger XLT 4x4, ext. cab, 4.0L v6
Superlifted 33x12.5 Duratracs
1995 Ford Ranger STX 4x4 ext. cab 4.0l v6 SOLD
|
10-14-2016, 09:29 PM
|
|
2004 Ranger XLT
|
|
Join Date: Aug 2010
Posts: 2,309
|
|
Re: Fox 2.0x5 emulsion coilovers.
Quote:
Originally Posted by Jimmyspy
You have to brace the factory shock tower. The bracket "kit" uses two pieces of strap to bridge from the shock tower to the frame
|
That's what I was afraid of ... one could easily shell out some doe pretty quickly for this kind of set up.
Do I dare ask how much the "bracket kit" cost?
__________________
2004 black Ranger XLT- Sold
2004 Vista blue 2WD(custom paint job)Ranger XLT 4-door ext. cab with the 3.slow and auto trans black and blue FX4 Level II bucket seats with shorty console
2004 DSG FX4 with a 5R55E auto trans and 4:10 gears-Sold
2010 Redfire Metallic 2WD Ranger XLT,4-door ext. cab, 4.0 SOHC with auto trans, SLA front sus. traction control, Sirius Satellite radio and 3:55 gears
2003 red Ranger Edge 4X4, 4-door ext. cab -4.0 SOHC with a 5R55E auto trans
|
10-15-2016, 08:06 AM
|
|
Ford Ranger Driver
|
|
Join Date: Feb 2012
Posts: 2,172
|
|
Quote:
Originally Posted by Fordfan444
That's what I was afraid of ... one could easily shell out some doe pretty quickly for this kind of set up. Do I dare ask how much the "bracket kit" cost?
|
It's not too bad, there's only the 4 shock tower braces that need to be welded to the frame/shock tower. The rest of it is pretty much bolt on, depending on what you do for limit straps.
I believe it's running around 250 or so. There's a guy over on R-F that makes them, ME00stepside. Most expensive part of the swap is the coilovers and springs.
__________________
2002 Ford Ranger XLT 4x4, ext. cab, 4.0L v6
Superlifted 33x12.5 Duratracs
1995 Ford Ranger STX 4x4 ext. cab 4.0l v6 SOLD
|
|
|
|
10-15-2016, 05:26 PM
|
|
2004 Ranger XLT
|
|
Join Date: Aug 2010
Posts: 2,309
|
|
Re: Fox 2.0x5 emulsion coilovers.
Quote:
Originally Posted by Jimmyspy
It's not too bad, there's only the 4 shock tower braces that need to be welded to the frame/shock tower. The rest of it is pretty much bolt on, depending on what you do for limit straps.
I believe it's running around 250 or so. There's a guy over on R-F that makes them, ME00stepside. Most expensive part of the swap is the coilovers and springs.
|
Thanks for the reference.
I'm just curious, (this is probably a silly question)
Does this set-up/conversion eliminate the need for your torsion bars?
__________________
2004 black Ranger XLT- Sold
2004 Vista blue 2WD(custom paint job)Ranger XLT 4-door ext. cab with the 3.slow and auto trans black and blue FX4 Level II bucket seats with shorty console
2004 DSG FX4 with a 5R55E auto trans and 4:10 gears-Sold
2010 Redfire Metallic 2WD Ranger XLT,4-door ext. cab, 4.0 SOHC with auto trans, SLA front sus. traction control, Sirius Satellite radio and 3:55 gears
2003 red Ranger Edge 4X4, 4-door ext. cab -4.0 SOHC with a 5R55E auto trans
|
|
|
|
10-15-2016, 05:27 PM
|
|
No wire hangers, ever!
|
|
Join Date: Jun 2010
Posts: 10,362
|
|
Re: Fox 2.0x5 emulsion coilovers.
Quote:
Originally Posted by Fordfan444
Does this set-up/conversion eliminate the need for your torsion bars?
|
Yes.
|
10-15-2016, 05:45 PM
|
|
2004 Ranger XLT
|
|
Join Date: Aug 2010
Posts: 2,309
|
|
Re: Fox 2.0x5 emulsion coilovers.
Quote:
Originally Posted by Logan03CO
Yes.
|
That's awesome, now I definitely want to do this conversion because the torsion bars give trucks such a rough ride.
__________________
2004 black Ranger XLT- Sold
2004 Vista blue 2WD(custom paint job)Ranger XLT 4-door ext. cab with the 3.slow and auto trans black and blue FX4 Level II bucket seats with shorty console
2004 DSG FX4 with a 5R55E auto trans and 4:10 gears-Sold
2010 Redfire Metallic 2WD Ranger XLT,4-door ext. cab, 4.0 SOHC with auto trans, SLA front sus. traction control, Sirius Satellite radio and 3:55 gears
2003 red Ranger Edge 4X4, 4-door ext. cab -4.0 SOHC with a 5R55E auto trans
|
10-15-2016, 06:02 PM
|
|
Ford Ranger Driver
|
|
Join Date: Feb 2012
Posts: 2,172
|
|
Quote:
Originally Posted by Fordfan444
Thanks for the reference. I'm just curious, (this is probably a silly question) Does this set-up/conversion eliminate the need for your torsion bars?
|
Yep. Eliminates tbars and any related components.
__________________
2002 Ford Ranger XLT 4x4, ext. cab, 4.0L v6
Superlifted 33x12.5 Duratracs
1995 Ford Ranger STX 4x4 ext. cab 4.0l v6 SOLD
|
10-16-2016, 07:15 AM
|
|
Learning to use the forums
|
|
Join Date: Sep 2016
Posts: 9
|
|
Re: Fox 2.0x5 emulsion coilovers.
Quote:
Originally Posted by Jimmyspy
Yep. Eliminates tbars and any related components.
|
Thank you guys for answering his questions I always forget to check this website.
__________________
SUPERLIFTED 2002 Fx4 on 33x12.50r15 BFg Ko2s and soft 8s, Coilover conversion, 06 Mirrors, RCI Skid plates.
|
10-26-2016, 11:03 PM
|
|
Ford Ranger Driver
|
|
Join Date: Sep 2012
Posts: 619
|
|
Re: Fox 2.0x5 emulsion coilovers.
If you still have this around Christmas time I may be interested.
Sent from my SM-N910V using Tapatalk
__________________
2000 Ford Ranger XLT Ext. Cab - 4.0L - 4WD - 3" BL - AAL - Maxed T-Bars - 16" Mickey Thompson Classic Locks - 265/75/16 Cooper AT3s - 12" Power Acoustik Sub @ 1200 watts
|
01-13-2017, 04:13 PM
|
|
Ford Ranger Owner
|
|
Join Date: Dec 2014
Posts: 56
|
|
Re: Fox 2.0x5 emulsion coilovers.
If these are still available I'm very interested in them. Please PM
__________________
~Bone Stock 2004 Ranger FX4 Level II
|
02-01-2017, 07:02 PM
|
|
Learning to use the forums
|
|
Join Date: Sep 2016
Posts: 9
|
|
Bump
__________________
SUPERLIFTED 2002 Fx4 on 33x12.50r15 BFg Ko2s and soft 8s, Coilover conversion, 06 Mirrors, RCI Skid plates.
|
|
|