Absolutely! Thread is up.

__________________
Blue 1998 Ford Ranger XLT stepside, single cab, 2.5L.
If you like LOLZ, click HERE for the best thread FRF has ever seen!
#BringbackHOI

Hey Jacob I forgot, but what was your lift that you have on your truck?

__________________
2003 Mazda B3000 - Prosound Single in Dual Out Muffler, Custom Piping straight to the back, 3 inch tips. 30x9.50x15 Rocky Mountain ATS. Steel Craft 3 inch Round Chrome Step Rails. Billet Grille on the way. Realtree Outfitters Camo Steering Wheel cover. Mossey Oak Floor Mats. Realtree Outfitters Windsheild Decal. Official Louisiana Sportsman Decal. More to add once I install it!!!!

Alright y'all I think I got my lift setup decided after meeting with fazda and Jacob yesterday!! I think I'm going to go with a 4 inch spindle lift and a 3 inch rear block!! What types of shocks would y'all recomend and thoughts on it?

__________________
2003 Mazda B3000 - Prosound Single in Dual Out Muffler, Custom Piping straight to the back, 3 inch tips. 30x9.50x15 Rocky Mountain ATS. Steel Craft 3 inch Round Chrome Step Rails. Billet Grille on the way. Realtree Outfitters Camo Steering Wheel cover. Mossey Oak Floor Mats. Realtree Outfitters Windsheild Decal. Official Louisiana Sportsman Decal. More to add once I install it!!!!

https://www.amazon.com/dp/B00BENOOA4..._YqQUub11DS2NR
This is what I have, and a one inch block. I wouldn't do 3 inch block. Axle wrap is a bitch.

What year is your truck?

__________________
Blue 1998 Ford Ranger XLT stepside, single cab, 2.5L.
If you like LOLZ, click HERE for the best thread FRF has ever seen!
#BringbackHOI

Depends on your application . Blistens , Pro Comp . Ranchos . fox ... All are great

__________________
02 Edge 3.0L 4X4 , 4.10 Ls gears.. Mickey Thompson Baja Claws , American Racing Baja Rims Flow Master 40 .

It's a 2003 mazda what about 2 inch blocks? I was going to do 3 so it would be level and not a lot of lean

__________________
2003 Mazda B3000 - Prosound Single in Dual Out Muffler, Custom Piping straight to the back, 3 inch tips. 30x9.50x15 Rocky Mountain ATS. Steel Craft 3 inch Round Chrome Step Rails. Billet Grille on the way. Realtree Outfitters Camo Steering Wheel cover. Mossey Oak Floor Mats. Realtree Outfitters Windsheild Decal. Official Louisiana Sportsman Decal. More to add once I install it!!!!

Okay then those spindle would work.

I mean it's YOUR truck, you can do blocks if you want.
I would just rather have shackles on MY truck.

__________________
Blue 1998 Ford Ranger XLT stepside, single cab, 2.5L.
If you like LOLZ, click HERE for the best thread FRF has ever seen!
#BringbackHOI

Were those the lowering shackles for the full size trucks or is that an actual lifting shackle for a ranger?

----------

So Jacob you have total 4 in the front and 3 in the back or two in the back?

__________________
2003 Mazda B3000 - Prosound Single in Dual Out Muffler, Custom Piping straight to the back, 3 inch tips. 30x9.50x15 Rocky Mountain ATS. Steel Craft 3 inch Round Chrome Step Rails. Billet Grille on the way. Realtree Outfitters Camo Steering Wheel cover. Mossey Oak Floor Mats. Realtree Outfitters Windsheild Decal. Official Louisiana Sportsman Decal. More to add once I install it!!!!

They're belltech 6400 shackles.

Correct. 4 in front 3 in rear.

__________________
Blue 1998 Ford Ranger XLT stepside, single cab, 2.5L.
If you like LOLZ, click HERE for the best thread FRF has ever seen!
#BringbackHOI

And that extra inch in the back is from the 1 inch block correct?

__________________
2003 Mazda B3000 - Prosound Single in Dual Out Muffler, Custom Piping straight to the back, 3 inch tips. 30x9.50x15 Rocky Mountain ATS. Steel Craft 3 inch Round Chrome Step Rails. Billet Grille on the way. Realtree Outfitters Camo Steering Wheel cover. Mossey Oak Floor Mats. Realtree Outfitters Windsheild Decal. Official Louisiana Sportsman Decal. More to add once I install it!!!!

Yessss

__________________
Blue 1998 Ford Ranger XLT stepside, single cab, 2.5L.
If you like LOLZ, click HERE for the best thread FRF has ever seen!
#BringbackHOI

After a ton of over thinking I went spindle and Belltechs. My ass end sti sat a little low so when I did my 8.8 swap I did bastard packs and got rid of the stock blocks. Gave me 2" in the rear with block removed. Put in Monroe Reflexes for an F250 for the correct length. Ride has DEF stiffened a bit, but I am ok with it.

----------

__________________
01 Ranger Edge 2wd 5spd 3.0
8.8 swap with Richmond 4.56s & Detroit Truetrac

WNPs Spindle lift/Explorer bastard packs/Belltech Shackles, Mustang Disc Swap, 33x12.5R15 Duratracs on Mickey Thompson Sidebiter IIs, Cargo 3rd brakelight swap, 06+ Mirrors, VHT Nightshade tails/3rd, 04 FX4 Valance, Headlight/foglight mod, Interior Next!

hi

__________________
Blue 1998 Ford Ranger XLT stepside, single cab, 2.5L.
If you like LOLZ, click HERE for the best thread FRF has ever seen!
#BringbackHOI

Reviving from the dead!

Has anybody seen/done the superlift coil over conversion?

__________________

I would love to but haven't yet

__________________

Truck: 2000 Ford Ranger XLT 4.0 4x4 ext cab
My Build Thread
Mod Ideas
Don't Forget to:
Create a Signature
Show your system

Mods: Brush guard|Front Hitch|Expo Roof Rack|Train Horn|Door/Dash/step/Hood Leds|2" lift|Rear Tow Points|On-Board Air System| 22" & 40" LED bar|and More!