Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 07-12-2016, 05:12 AM
Jacob5656 Jacob5656 is offline
Like the Forums
 
Join Date: Feb 2015
Posts: 41
Default Need help after SAS swap!!

So I put brand new Dana 44 full size axle under my 1994 ford ranger 4.0.grinded off all old brackets then put all james duff mounts.truck ran great when parked when to start it about 4 1/2 months later and all it does is crank crank crank.its getting spark just no fuel.checked relay it's getting power.enertia switch bypassed.new fuel pump.tested wires and there is no power at all.only way it will start is with starting fluid!! Please help miss the truck
__________________
1994 ford ranger,4.0l,207,000miles,super 10 flow master straight back, 4suspension 3body,2inch wheel spacers.33/12.5/15,sas soon,5%tint.new paint job.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sas swap on 2wd stuffedranger Solid Axle Swap 0 12-08-2015 01:16 PM
SAS swap+lift cdawall Solid Axle Swap 244 04-14-2015 09:29 PM
1 ton SAS swap Lil-Ford Solid Axle Swap 7 01-02-2014 03:03 PM
89 sas swap alstonish Introduce Yourself 3 02-21-2013 03:14 PM
Sas swap COFORDGUY Solid Axle Swap 2 01-17-2013 08:52 AM