Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 09-19-2009, 07:18 AM
shawn shawn is offline
94 2.3 5 sp danger ranger
 
Join Date: Sep 2009
Posts: 102
Default shaking

when i am driving whether i am in neutral or gear my truck has a shake and a thump thump sound i noticed that there are no outside wheel wheigts is that why or what would cause this?
Reply With Quote
  #2  
Old 09-19-2009, 07:21 AM
shawn shawn is offline
94 2.3 5 sp danger ranger
 
Join Date: Sep 2009
Posts: 102
Default

please someone
Reply With Quote
  #3  
Old 09-19-2009, 07:23 AM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,399
Default

Are you pos. the wheel weights are not on the inside of the wheel?

Also sitting and not moving will not be a result from no wheel weights

Need some info on what year truck engine transmission miles
__________________
2005 Edge

Reply With Quote
  #4  
Old 09-19-2009, 07:51 AM
shawn shawn is offline
94 2.3 5 sp danger ranger
 
Join Date: Sep 2009
Posts: 102
Default shaking

it only shakes when i am moving it is a 94 2.3 5 speed with 193000 miles the shaking gets a little worse as i go faster tire pressure is okay and yes the weigts are on the inside but i thought you have to balance the inside and outside?
Reply With Quote
  #5  
Old 09-19-2009, 10:51 AM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,399
Default

You can go to a tire shop and have them checked walamart may check them for free and only charge if it is out of balance

Mine have different size weights on each wheel spaced out. so one may have fallen off

I always get mine balanced and then document each tires weight so I can periodically check
__________________
2005 Edge

Reply With Quote
  #6  
Old 09-19-2009, 11:28 AM
shawn shawn is offline
94 2.3 5 sp danger ranger
 
Join Date: Sep 2009
Posts: 102
Default

could it be a bearing tie rod or balljoint how do i tell
Reply With Quote
  #7  
Old 09-19-2009, 11:47 AM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,399
Default

Crawl under the truck and inspect the ball joints

Get your tires checked to eliminate that
__________________
2005 Edge

Reply With Quote
  #8  
Old 09-19-2009, 11:54 AM
shawn shawn is offline
94 2.3 5 sp danger ranger
 
Join Date: Sep 2009
Posts: 102
Default

how do i inspect a balljoint
Reply With Quote
  #9  
Old 09-19-2009, 03:10 PM
shawn shawn is offline
94 2.3 5 sp danger ranger
 
Join Date: Sep 2009
Posts: 102
Default

had it looked at was a outside tie rod end thanks forr advice
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
HIghway Shaking Problem!!!! godbout.t Suspension Tech 14 09-19-2009 01:32 AM
94 manual shaking idle cdsxr400 4-Cylinder Tech 0 06-18-2009 07:50 PM
Ranger started shaking tippy 4-Cylinder Tech 7 05-26-2009 07:48 PM