Just fish hook it with a finger and pull... they're just barely clipped in. If that doesn't work go with a small flat head screw driver and run it under the edge gently.
Alright ill try that this weekend. All the black looks really good man. Did you take off the glove box door and stuff?
__________________
03 Ranger XLT 4x2 | 3.0l 2-door ext. cab auto trans | BTF Fabricated Spindles/Camburg Upper Arms/Camburg 2.5" coils/Bilstein 5100s/Limit Straps | 2" shackles/2.5" blocks | airbox mod w/ k&n drop in | thrush welded | blacked out emblems | 6000k hids | 06+ tails & corners | Cargo Light Mod | Billet Grille | Custom Bumper | Hella 700ffs | 32x11.5x15 BFG AT KO | 15" Procomp 7031 | Buggman LED Mustang Dome/Cluster/Reverse Lights | Kenwood Headunit | FORD floor mats
Yeah pulled it off because I wanted to leave the handle gray and it was less of a pain in the butt than masking it off and spraying it in the truck. The airbag cover I just left in, since I didn't feel like messing around with disconnecting the airbag and pulling it out.
__________________
2006 XLT 4x4 4.0 V6 Build Thread - Superlift 4" Suspension Lift - Superlift front driveshaft - K&N FIPK Intake - aFe Silver Bullet throttle body spacer - 33" ProComp Xtreme MTs on 16" XD Hoss - Westin bull bar/ steps - GoRhino bed bars - Bushwacker Flares - 4x 130w KCs - TRex grille - Black headlights & corners - Black LED tails - Herculiner - Custom ex cab storage box - Mustang dome
FUTURE MODS: Window Tint (ASAP) - Custom center console - Explorer OHC - Red dash LEDs - 3" body lift & 35s
Yeah pulled it off because I wanted to leave the handle gray and it was less of a pain in the butt than masking it off and spraying it in the truck. The airbag cover I just left in, since I didn't feel like messing around with disconnecting the airbag and pulling it out.
Ah got it it looks good man
__________________
03 Ranger XLT 4x2 | 3.0l 2-door ext. cab auto trans | BTF Fabricated Spindles/Camburg Upper Arms/Camburg 2.5" coils/Bilstein 5100s/Limit Straps | 2" shackles/2.5" blocks | airbox mod w/ k&n drop in | thrush welded | blacked out emblems | 6000k hids | 06+ tails & corners | Cargo Light Mod | Billet Grille | Custom Bumper | Hella 700ffs | 32x11.5x15 BFG AT KO | 15" Procomp 7031 | Buggman LED Mustang Dome/Cluster/Reverse Lights | Kenwood Headunit | FORD floor mats
__________________
1998 Ranger, 3.0, twin stick, Cranked T-Bars, AAL, roll bar with 7" HID fogs, 06+ mirrors, 10" sub, white cluster, and explorer center console
Popped a sway bar end link last night. Decided to just take the sway bar out and I'm loving it so far. My buddy insists I'm going to roll over at the next corner, but I think as long as I don't dodge any deer at high speed I'll be fine.
----------
Quote:
Originally Posted by getrdone52
Where did you get the mount for your lights?
The bed bars and the light mounting bar are both from GoRhino.
__________________
2006 XLT 4x4 4.0 V6 Build Thread - Superlift 4" Suspension Lift - Superlift front driveshaft - K&N FIPK Intake - aFe Silver Bullet throttle body spacer - 33" ProComp Xtreme MTs on 16" XD Hoss - Westin bull bar/ steps - GoRhino bed bars - Bushwacker Flares - 4x 130w KCs - TRex grille - Black headlights & corners - Black LED tails - Herculiner - Custom ex cab storage box - Mustang dome
FUTURE MODS: Window Tint (ASAP) - Custom center console - Explorer OHC - Red dash LEDs - 3" body lift & 35s
Haha thanks. For that box I used his measurements from the how to thread, and then cut the lid to fit just the box part so it would open from front to back instead. The piece across the back behind the lids is just to cover up the mounts and make it look pretty.
__________________
2006 XLT 4x4 4.0 V6 Build Thread - Superlift 4" Suspension Lift - Superlift front driveshaft - K&N FIPK Intake - aFe Silver Bullet throttle body spacer - 33" ProComp Xtreme MTs on 16" XD Hoss - Westin bull bar/ steps - GoRhino bed bars - Bushwacker Flares - 4x 130w KCs - TRex grille - Black headlights & corners - Black LED tails - Herculiner - Custom ex cab storage box - Mustang dome
FUTURE MODS: Window Tint (ASAP) - Custom center console - Explorer OHC - Red dash LEDs - 3" body lift & 35s
If I put one back on it'll be black with chrome lettering. Other stuff higher on the priority list at the moment, mostly involving my girlfriend's turd bucket of a car getting fixed. Kills me working on a Mazda. lol
__________________
2006 XLT 4x4 4.0 V6 Build Thread - Superlift 4" Suspension Lift - Superlift front driveshaft - K&N FIPK Intake - aFe Silver Bullet throttle body spacer - 33" ProComp Xtreme MTs on 16" XD Hoss - Westin bull bar/ steps - GoRhino bed bars - Bushwacker Flares - 4x 130w KCs - TRex grille - Black headlights & corners - Black LED tails - Herculiner - Custom ex cab storage box - Mustang dome
FUTURE MODS: Window Tint (ASAP) - Custom center console - Explorer OHC - Red dash LEDs - 3" body lift & 35s