|
|
|
|
02-08-2013, 06:37 PM
|
|
Truck YEAH!!!
|
|
Join Date: Jan 2013
Posts: 222
|
|
5.0 Swap MD50R2 and BW4406
Over the last month or so i've been planning on doing a 5.0 swap into my 2000 extended cab 4X4 4.0 ford ranger. When i started out i was going to try and find an engine from at least a 98 explorer so i could keep PATS in my vehicle and not have to have new keys made. But after searching all of the junk yards in the area i came home with an engine out of a 97 Mountaineer. This has its ups and downs:
Pro's: No PATS system
Con's: Fuel system requires running a return fuel line
here's a list with prices of everything i have so far:
Engine- complete including alternator, power steering pump, high pressure power steering hose, a/c pump and lines, throttle cable, cruise control cable, starter, batter cable harness, evap control and hose, fan shroud and ecu paid $493 to picknpull which included core charges. Came out of a 1997 Mercury Mountaineer
Pulling from Mounty.jpg
HOme complete.jpg
Transmission- MD50R2 out of a 1997 F-150 4.2L V6 4X4 $400 from salvage yard
Transfer case- BW 4406 with electric shift out of a 1997 f-150 $200 same salvage yard as tranny- 107k miles on them
Flywheel- 164 tooth with 50 oz of imbalance from autozone $53 listed as flywheel for 1995 f-150 with the 5.0 p/n FW9710
SCT tuner from moreperformancetuning.com that came with 3 free custom tunes- to delete the automatic transmission out of the ecu $380
11 inch clutch kit from summit racing $120
Manual transmission starter from ebay -$35
Front drive shaft from 97 f-150 from salvage yard -$75
Ujoint adapter from autozone for front drive shaft -$8
Rear drive shaft from 96 f-350 measured 51" from salvage yard -$100
Ujoint adapter from NAPA for rear drive shaft to fit 8.8 rear axle -$26 P/N 448
Gaskets from Autozone- intake manifolds, oil pan, $30
Spark Plug wires from summit racing
Exhaust peices from summit header back- 2.5" pipes, magnaflow muffler, high flow cat, $200 going to be side exit single in front of the rear tire
So Total is a little over $2k- turned out to be more than i wanted it to be but in the end i have the manual transmission still and 4wd on the fly since the shift motor from the ranger bolts right onto the 4406, plug and play basically.
So i'm planning on doing the swap next weekend -the 16th of Feb, as i am still waiting on a few essential parts to get delivered. Going to document it all how it fits, things i had to change- like the wiring- going to take pictures of what exactly i changed about the alternator and a/c compressor and anything else that needs to be changed.
__________________
2000 Ford Ranger 4X4 5.0L V8 manual transmission
1.5" Wheel spacers 365/75-r16 tires 4:10 diff, cranked tbars
K&N cold air intake Magnaflow Custom exhaust Custom Dents in fender and box- Priceless!!
2012 TDI Golf tinted windows, 6spd manual
Last edited by lifedigger; 02-08-2013 at 06:41 PM.
Reason: add some info
|
|
|
|
Register and never see these ads again. |
|
02-08-2013, 07:50 PM
|
|
Mazda B4000 Owner
|
|
Join Date: Aug 2012
Posts: 275
|
|
Re: 5.0 Swap MD50R2 and BW4406
Good luck with everything man, I am excited to see the progress.
__________________
1994 B4000 5 speed 4x4
31x10.50 Bridgestone Dualer A/T
Throttle cable mod, tinted windows, tool box
|
02-08-2013, 11:59 PM
|
|
Ford Ranger Driver
|
|
Join Date: Mar 2012
Posts: 1,099
|
|
Re: 5.0 Swap MD50R2 and BW4406
Scribbed. Why didnt you go with a manual transfercase?
__________________
1998 Ranger, 3.0, twin stick, Cranked T-Bars, AAL, roll bar with 7" HID fogs, 06+ mirrors, 10" sub, white cluster, and explorer center console
|
02-09-2013, 12:41 AM
|
|
Truck YEAH!!!
|
|
Join Date: Jan 2013
Posts: 222
|
|
Fitment of the shifter linkage in the tunnel, cutting a hole in my floorboard. I've had good luck with the electronic.
__________________
2000 Ford Ranger 4X4 5.0L V8 manual transmission
1.5" Wheel spacers 365/75-r16 tires 4:10 diff, cranked tbars
K&N cold air intake Magnaflow Custom exhaust Custom Dents in fender and box- Priceless!!
2012 TDI Golf tinted windows, 6spd manual
|
02-09-2013, 03:29 AM
|
|
Ford Tough
|
|
Join Date: Apr 2012
Posts: 436
|
|
Re: 5.0 Swap MD50R2 and BW4406
subscribed
__________________
2011 Ford Ranger Sport 4x4, 3" Body Lift, 3" Suspension Lift, Dixie Horn, 35" Goodyear Wrangler Duratracs, Eagle Alloy 100 Series Black Rims, CB Radio,15 Watt PA Speaker, Truxedo Tonneau Cover, Rubber Bed Liner, Brush Guard, Fire Extinguisher Bracket.
Quote:
Originally Posted by Fordzilla80
I once saw two dudes making out in Publix, and I used to think that was the gayest thing ever, but then I found out about "stance".
|
|
02-09-2013, 08:33 AM
|
|
Ford Ranger Driver
|
|
Join Date: Mar 2012
Posts: 1,099
|
|
Quote:
Originally Posted by lifedigger
Fitment of the shifter linkage in the tunnel, cutting a hole in my floorboard. I've had good luck with the electronic.
|
How much would you need to cut? Im the opposite I've had bad luck with electric and I have a manual t case now
__________________
1998 Ranger, 3.0, twin stick, Cranked T-Bars, AAL, roll bar with 7" HID fogs, 06+ mirrors, 10" sub, white cluster, and explorer center console
|
02-09-2013, 11:45 AM
|
|
Truck YEAH!!!
|
|
Join Date: Jan 2013
Posts: 222
|
|
Oh about a 4x5 hole i think, then you have to reseal it.
__________________
2000 Ford Ranger 4X4 5.0L V8 manual transmission
1.5" Wheel spacers 365/75-r16 tires 4:10 diff, cranked tbars
K&N cold air intake Magnaflow Custom exhaust Custom Dents in fender and box- Priceless!!
2012 TDI Golf tinted windows, 6spd manual
|
02-12-2013, 06:12 PM
|
|
Truck YEAH!!!
|
|
Join Date: Jan 2013
Posts: 222
|
|
Re: 5.0 Swap MD50R2 and BW4406
Update: bunch more parts came in yesterday and today: flywheel, gasket set, water pump. now i need to get the proper bolts to hold the pressure plate onto the flywheel. They are the same size and pitch thread as the exhaust manifold bolts but they require a short section without threads near the heads to align the pressure plate onto the flywheel because there aren't any alignment studs on these flywheels. Also did a little homework on the wiring changes that need to be made. Will post pictures later tonight when i get home from work. :-)
__________________
2000 Ford Ranger 4X4 5.0L V8 manual transmission
1.5" Wheel spacers 365/75-r16 tires 4:10 diff, cranked tbars
K&N cold air intake Magnaflow Custom exhaust Custom Dents in fender and box- Priceless!!
2012 TDI Golf tinted windows, 6spd manual
|
02-12-2013, 06:26 PM
|
|
Ford Ranger Driver
|
|
Join Date: Mar 2012
Posts: 1,099
|
|
Quote:
Originally Posted by lifedigger
Update: bunch more parts came in yesterday and today: flywheel, gasket set, water pump. now i need to get the proper bolts to hold the pressure plate onto the flywheel. They are the same size and pitch thread as the exhaust manifold bolts but they require a short section without threads near the heads to align the pressure plate onto the flywheel because there aren't any alignment studs on these flywheels. Also did a little homework on the wiring changes that need to be made. Will post pictures later tonight when i get home from work. :-)
|
Sweet! How many more parts do you need?
__________________
1998 Ranger, 3.0, twin stick, Cranked T-Bars, AAL, roll bar with 7" HID fogs, 06+ mirrors, 10" sub, white cluster, and explorer center console
|
02-12-2013, 06:50 PM
|
|
Truck YEAH!!!
|
|
Join Date: Jan 2013
Posts: 222
|
|
Re: 5.0 Swap MD50R2 and BW4406
Well waiting on a few exhaust peices but other than those bolts i've pretty much got everything. Fingers crossed to get it all started saturday morning. Gonna hit up home depot in the morning for the bolts and some hose clamps.
__________________
2000 Ford Ranger 4X4 5.0L V8 manual transmission
1.5" Wheel spacers 365/75-r16 tires 4:10 diff, cranked tbars
K&N cold air intake Magnaflow Custom exhaust Custom Dents in fender and box- Priceless!!
2012 TDI Golf tinted windows, 6spd manual
|
02-12-2013, 07:27 PM
|
|
Ford Ranger Driver
|
|
Join Date: Mar 2012
Posts: 1,099
|
|
Quote:
Originally Posted by lifedigger
Well waiting on a few exhaust peices but other than those bolts i've pretty much got everything. Fingers crossed to get it all started saturday morning. Gonna hit up home depot in the morning for the bolts and some hose clamps.
|
Nice. Im looking forward to it
__________________
1998 Ranger, 3.0, twin stick, Cranked T-Bars, AAL, roll bar with 7" HID fogs, 06+ mirrors, 10" sub, white cluster, and explorer center console
|
02-13-2013, 02:34 AM
|
|
Truck YEAH!!!
|
|
Join Date: Jan 2013
Posts: 222
|
|
ForumRunner_20130213_013118.jpg
ForumRunner_20130213_013136.jpg
ForumRunner_20130213_013155.jpg
Got most of it put together tonight, still waiting on the starter for the manual transmission which has a shorter nose on it. Next is the top of the engine and the couple wiring changes to the harness.
__________________
2000 Ford Ranger 4X4 5.0L V8 manual transmission
1.5" Wheel spacers 365/75-r16 tires 4:10 diff, cranked tbars
K&N cold air intake Magnaflow Custom exhaust Custom Dents in fender and box- Priceless!!
2012 TDI Golf tinted windows, 6spd manual
|
02-13-2013, 12:48 PM
|
|
Truck YEAH!!!
|
|
Join Date: Jan 2013
Posts: 222
|
|
ForumRunner_20130213_114723.jpg
Rest of the exhaust came, waiting on that starter. Should be here later today or tomorrow!
__________________
2000 Ford Ranger 4X4 5.0L V8 manual transmission
1.5" Wheel spacers 365/75-r16 tires 4:10 diff, cranked tbars
K&N cold air intake Magnaflow Custom exhaust Custom Dents in fender and box- Priceless!!
2012 TDI Golf tinted windows, 6spd manual
|
02-14-2013, 10:46 PM
|
|
Truck YEAH!!!
|
|
Join Date: Jan 2013
Posts: 222
|
|
Starter came in, did a little test fit of the engine to transmission, the auto dust shield will work with a little bit of tweaking on the top of the starter hole. Needs to be a little bigger, everything clears when its all bolted together.
ForumRunner_20130214_214321.jpg
ForumRunner_20130214_214333.jpg
__________________
2000 Ford Ranger 4X4 5.0L V8 manual transmission
1.5" Wheel spacers 365/75-r16 tires 4:10 diff, cranked tbars
K&N cold air intake Magnaflow Custom exhaust Custom Dents in fender and box- Priceless!!
2012 TDI Golf tinted windows, 6spd manual
|
02-14-2013, 10:58 PM
|
|
Ford Ranger Driver
|
|
Join Date: Mar 2012
Posts: 1,099
|
|
You're almost to the hard part!
__________________
1998 Ranger, 3.0, twin stick, Cranked T-Bars, AAL, roll bar with 7" HID fogs, 06+ mirrors, 10" sub, white cluster, and explorer center console
|
|
|