The center section of the back wall cover is removable, I used a very sharp knife to cut out the molded mount for the jack kit.

Bought a small roll of automotive black carpet from Menards along with a small tub of carpet glue.
I used some old scrap plastic to cover the hole left by the jack mount and glued the carpet over the back wall plastic cover. Clamped it down over night, and VOILA! A carpeted back wall!



I added a stand-off cover on top of the sub box made from 1/2 plywood, and PVC pipe adapters with the threads cut off to deter any would be thieves. Plus I can set things like groceries and stuff behind the seats.



Yes, I know "But the amps will get too hot"- No, they wont. There is about 3/4 of an inch of space above the amp, and I dont have them on for long durations or at such a high demand for power to get them heated up.

__________________
2011 XLT EXT, 4x4 4.0 SOHC V6 NOVEMBER 2012 TOTM WINNER
A whole plethora of mods and goodies. Check out the build log here: GoGoPowerranger's Build Log

For Photo Albums: Truck Pix, The Console

Wow thanks i might have to do this cause i dont need have the junk in the cover cause i have my tire in my bed and i could just toss what i do need back there

Sent from my iPhone 4 using FRF App

__________________
Black 2008 ranger sport 4.0 SOHC SAS'd and converted to 4x4 riding on a Dana 50 up front and a sterling 10.50 in the rear regeared with 5.13's, mickey thompson classic 3's rapped in 37x12.50 maxxis creepy crawlers

Was that B&M shifter hard to do, was it a kit or custom?

__________________
2001 Mazda B4000 SE 4x4 lifted n' junk too many mods to list check out my Build Thread

do a write up on just the centre console! dayum its nice

__________________

four by four, CB radio & a gps. all you really need

Where did you find that sub box?

He didn't. He made it.

I really like what you've done with your 2011. It's one thing to throw goodies into your truck, it's another to make it look good at the same time.

I love the mods you don't see guys modding 2011s often eat to join the club check out my album

Sent from my SGH-I337M using Tapatalk

__________________
2012 f150 fx4 crew cab 5.0

I wish I could take credit for building it. I must be honest, I bought it online, and was completely surprised. It was made with pretty good quality and was actual 3/4 inch MDF. The connectors kinda blew goats for nickels, but I had plans to use something different anyways

http://www.halfpricecaraudio.com/For...sure-Black.htm

__________________
2011 XLT EXT, 4x4 4.0 SOHC V6 NOVEMBER 2012 TOTM WINNER
A whole plethora of mods and goodies. Check out the build log here: GoGoPowerranger's Build Log

For Photo Albums: Truck Pix, The Console

Amazing job!
That center console is sick!

__________________
Gold 05 xlt 4.0 auto 4x4.

My build thread
http://www.fordrangerforum.com/proje...build-log.html

thanks for the link. It is a b**** on mobile to look at though, so I will check it out on PC.

Very nice work. Was there not a problem with keeping the warranty fully covered with some of the Mods you did. There are a few things I want to add to mine but don't want any warranty void when it comes to certain things

__________________
It's not the size of the dog in the fight. It's the size of the fight in the dog
2011 Ranger Sport 2wd 4L
Kenwood stereo and speaker system
Under dash and behind Grill LED lighting
Weston Bull Bar
3 in Body lift 15x8 Rock Crawler rims 32x11.5 Goodyear A/T

If this posts twice I'm sorry

Sent from my SGH-I337M using Tapatalk

----------

Ford canada states that warenty will only be void if and alteration or mod had caused direct failure to part or parts plus it depends on the dealer that you go to. The dealer that I deal with has allot of guys with jacked trucks so they are more lenient with lifted trucks

Sent from my SGH-I337M using Tapatalk

__________________
2012 f150 fx4 crew cab 5.0

Sub'D

__________________
2001 Xl 4x4 4.0 4 door

Such a nice truck and great custom mods.

__________________

Dude your truck looks awesome! Good build so far!

__________________
1994 ford ranger 4.0l v6
My build thread!:
http://www.fordrangerforum.com/proje...arm-truck.html

"Life is hard, It's even harder when your stupid" - John Wayne