Future mod list. Any suggestions on more? It's gonna be completely blacked out. I hate chrome.

Fabtech 3 inch spindle lift
2inch add a leaf
Longer front and rear shocks
31inch BF Goodrich all terrains
Flowmaster 40 exhaust
6000k HID hi/lo kit
10inch sub and amp
6 new speakers
Fog light mod
White FRF sticker
LED tail lights
Blue gauge leds and HVAC
Buggman blue Fog light switch
Tonneau lock and roll bed cover
Blue leds in back seat
50% tinted front windows
Painted grille or black billet grille
Hella 500s behind grille

__________________
Black 2004 Ford Ranger Edge 3.0 V6
Spindle lift on 31's

if you go with a spindle lift atleast go with 32's , K&N air intake is not needed just do the airbox mod,

__________________
2003 Ranger Edge Ext. 5 speed, 4.0L,3.55 8.8 L/S,3" BL, 33 mud kings , cragar soft 8's, xl9000, Blitzpro LED bar, 10000k hid, 06 tails, headlight mod, cobra cb, silver hvac panel, kenwood double din, kenwood excelon 12" sub, kenwood 1000 watt amp, OHC, level II tow hooks,

in the making: Custom rear steel bumper
pre-runner style front bumper

Well I'm getting the tires before the lift and I heard 32's would rub too much. I'm not getting the full CAI, just the filter.

__________________
Black 2004 Ford Ranger Edge 3.0 V6
Spindle lift on 31's

they shouldnt rub , you have and edge,basically same truck as me , notice how there's more room in the fender compared to the 06+ ?? if you crank the tbars you should have a problem

__________________
2003 Ranger Edge Ext. 5 speed, 4.0L,3.55 8.8 L/S,3" BL, 33 mud kings , cragar soft 8's, xl9000, Blitzpro LED bar, 10000k hid, 06 tails, headlight mod, cobra cb, silver hvac panel, kenwood double din, kenwood excelon 12" sub, kenwood 1000 watt amp, OHC, level II tow hooks,

in the making: Custom rear steel bumper
pre-runner style front bumper

nope you can torsion crank

i have 32s no rubbing no lift

with lift you can run up to 35s

Oh sweet. I'll look into 32s. I just wish I wasn't 450 miles away from all of my tools. I would crank my tbars this weekend if I could.

__________________
Black 2004 Ford Ranger Edge 3.0 V6
Spindle lift on 31's

check your axle code on the driver door sticker

I'll check tomorrow morning before I head to class. What am i looking for? I know nothing about axles.

__________________
Black 2004 Ford Ranger Edge 3.0 V6
Spindle lift on 31's

just the axle code so you will know what gears you have before you buy tires

It says axle 97?

__________________
Black 2004 Ford Ranger Edge 3.0 V6
Spindle lift on 31's

open diff 4.10

And that is good, bad, doesn't matter? haha I honestly have no clue.

__________________
Black 2004 Ford Ranger Edge 3.0 V6
Spindle lift on 31's

good

__________________
2003 Ranger Edge Ext. 5 speed, 4.0L,3.55 8.8 L/S,3" BL, 33 mud kings , cragar soft 8's, xl9000, Blitzpro LED bar, 10000k hid, 06 tails, headlight mod, cobra cb, silver hvac panel, kenwood double din, kenwood excelon 12" sub, kenwood 1000 watt amp, OHC, level II tow hooks,

in the making: Custom rear steel bumper
pre-runner style front bumper

its lowest gears offfered stock. L/S would be better

__________________
Twilight blue metallic clearcoat 1991 ford ranger super cab 4x4. 3.73 l/s 8.8, 31x10.50-15 tires 1.5 inch budget boost on front. Black everything, Zero chrome. 4.0 OHV 5 speed manual trans Sony Xplod head unit, two jvc 6x9s in boxes under seats in back, 300 watt amp with 12" infinity sub, Cobra 25 CB with 8 ft firestick mounted to toolbox.
build!

Well I don't really plan on getting a whole new axle. What do you suggest I do with the axle that I currently have?

__________________
Black 2004 Ford Ranger Edge 3.0 V6
Spindle lift on 31's