Where'd you get the manual hubs from? My auto hubs are toast

__________________

1994 Ford Ranger 4x4 extended cab 4.0 OHV
4" Rough Country lift
3" PA Body Lift
33x12.50x15 Goodyear Duratracs
15x8 Black MB 72 wheels
Red LED Interior
Throttle Mod
Stainless Brake Lines
Build Thread
SOLD

got mine from JUSTDIFFERENTIALS

call them to order them and say you found thhier add on ebay, and they will give youa discount if you buy over the phone

mine were tight under $200 for the conversion kit and the hubs,

also you will need to go to autozone and but the special tool for the manual hubs its $18 dollars and uses a 1/2" wrench and you will need a torque wrench cable of doing 30 ft-lbs, 16 in-lbs, and 150 ft-lbs

it takes all of half an hour to do both sides. dont have to remove caliper or anything

----------


thanks!

and yes my camber is slightly off, due to not having drop brackets, my lift springs did not settle down much and my camber is only off 1.5*

__________________
Colin S. AGE: 18
1994 Ford Ranger XLT 4x4 reg. cab 4.0l 5spd, 2" SL , Summit Nomads 15x8, 30x9.5x15 Trail Digger M/T's, cab lights, spray in bed liner, custom tube bumper,

1994 Ford Ranger XLT 2.3l 5spd ext. cab. the loaner truck

1987 Camaro z28 383 to much to list

https://www.facebook.com/colinshriver

http://www.fordrangerforum.com/proje...anger-4x4.html

I got cab lights too!

__________________
1994 ford ranger 4.0l v6
My build thread!:
http://www.fordrangerforum.com/proje...arm-truck.html

"Life is hard, It's even harder when your stupid" - John Wayne