i can get 15x10's at any point have a buddy who wants mine

well change it meow! still looking at that 4 banger fakeness haha

----------

wuuut?

__________________
http://treadlightly.org/quick-tips-f...four-wheeling/

I'm always on mobile
I'll do it when I'm hone

__________________
2001 Ranger XLT | 3.0L | 2WD | Thrush Welded Muffler | Alpine Sub | HIDs

got my fiberglass delivered on friday afteroon, had it installed a lil while later..
pics with some of my buddys rigs








new fav

__________________
http://treadlightly.org/quick-tips-f...four-wheeling/

that looks so much wider than 3" over

__________________
2002 DWB Ford Ranger XLT 3.0 V6 FF 4 Door
3" Doetsch spindle lift, 2.5" Camburg CRS coil lift, BTF uniball UCA's, ORW limit straps
Shackles, blocks, custom leaf pack, Bilstein 5100's/5125's F/R
33" GoodYear MTR's, 8.8 swap with 4.56 gears and L/S
Baja Designs 20" OnX, HID converted Hella's

I swear you have found so many different places for those duallies

Sent from my iPhone using FRF App

__________________
03 Ranger XLT 4x2 | 3.0l 2-door ext. cab auto trans | BTF Fabricated Spindles/Camburg Upper Arms/Camburg 2.5" coils/Bilstein 5100s/Limit Straps | 2" shackles/2.5" blocks | airbox mod w/ k&n drop in | thrush welded | blacked out emblems | 6000k hids | 06+ tails & corners | Cargo Light Mod | Billet Grille | Custom Bumper | Hella 700ffs | 32x11.5x15 BFG AT KO | 15" Procomp 7031 | Buggman LED Mustang Dome/Cluster/Reverse Lights | Kenwood Headunit | FORD floor mats

im starting to think its 5in glass.. ill have to compare mine to my room mates, he has the 5in hanneman fenders i bought earlier in the summer.
haha yea theyve been mounted in a handful of different places. they should be fine there, and ill throw and LED bar on the top.

__________________
http://treadlightly.org/quick-tips-f...four-wheeling/

My 4.5 fenders look similar. They cover everything except a half inch of tire. They might be 5".

__________________
1998 Ranger XLT
3.slow Auto
"One-off" mid travel kit pulling 14" of travel.
Bedcage with 2.0x14" Bilsteins
30" BFG AT's soon to be replaced with 33s of some sort.

the thing is i was looking at a build thread on DR (iisrandy's) and he has 3in fiberwerx. they look identical and his 33s dont even fill them out all the way.

__________________
http://treadlightly.org/quick-tips-f...four-wheeling/

just my opinion, but I like it when the tire is wider than the fenders/glass, Idk if Id go any wider if I was you.

__________________

going with 10s and losing the spacers. at some point haha

__________________
http://treadlightly.org/quick-tips-f...four-wheeling/

On 33's right?

__________________
2002 DWB Ford Ranger XLT 3.0 V6 FF 4 Door
3" Doetsch spindle lift, 2.5" Camburg CRS coil lift, BTF uniball UCA's, ORW limit straps
Shackles, blocks, custom leaf pack, Bilstein 5100's/5125's F/R
33" GoodYear MTR's, 8.8 swap with 4.56 gears and L/S
Baja Designs 20" OnX, HID converted Hella's

most likely. worried 35s will cause more stress on the snouts than needed.

__________________
http://treadlightly.org/quick-tips-f...four-wheeling/

good call

__________________

moar good calls!

found some tube half doors on CL this morning... fucking tempting.

__________________
http://treadlightly.org/quick-tips-f...four-wheeling/