Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 02-03-2017, 11:05 PM
LS Ranger LS Ranger is offline
Liking the Ford Ranger Forum
 
Join Date: Feb 2017
Posts: 25
Default Ls swap 1997 Ranger 2wd

So about two years ago I bought this 1997 Ranger 2wd with 2.3l and 5spd. Paid $1600 for it and drove it as a daily driver. Put about 100 miles a day on it for 2 years and never had any problems or issues.


----------

I took the truck to a local radar run to see how slow it was and ended up wrecking the trans. But still got a trophy for slowest vehicle at the track. The truck burned the tires thru 1st gear and when I grabbed 2nd there was a loud bang and then nothing. So like anybody else I just rammed it back into 1st and held it to the boards, 43mph in 1st gear and like 30 seconds in the 1/4mi.


----------

So I went to local Junk yard and picked these up a Lm7 5.3l and 4l60e from a 2002 Silverado with 100,000 miles. $700 Total came with two sets of coils maf sensor and trailblazer SS torque converter.


----------

Now the fun part.




----------

Had some issues with clearance, had to cut the heater box and fab a steering shaft with 3 joints in order to clear the headers. I tried all of the gm production manifolds and block hugger headers and nothing fit without taking big chunks of frame out. So I committed to the turbo headers. I used 78-79 Datsun 280z LS Swap mounts from Dirty Dingo and they bolted right in.




----------

Had to get a radiator support mine was rusted out, but on the plus side it was easy to work on with it gone.



----------

Here's how I solved the exhaust problem true duals, Magnaflow Magnapak Mufflers 14'' all welded or v-banded together. The exhaust will exit out the bed sides once the truck is up and running. It kills me to cut this box up seeing as it has no rust so I'm waiting till then.






----------

For the fuel system I bought a 20 gallon fuel cell from Summit and mounted it in the bed (not a fan of cutting a 7''x11'' hole in the bed). Also mounted a tubular 30'' trans cooler + battery in the bed. The kill switch/200amp circuit breaker is now mounted just under passenger side bed rail. I used all -6an line and a Walbro 255 fuel pump along with a corvette filter/regulator.





----------

I got most of the big stuff done, I ordered a PSI Conversion Harness & PCM, TCI Fastgate shifter and set of Caltrac bars to go on the 8.8'' rear end that I have sitting at the shop. I am at a standstill till spring since I cant get to the truck during the winter. But Once the snow melts this things gonna get done fast.



Reply With Quote
  #2  
Old 02-03-2017, 11:25 PM
3.Slow Ranger 3.Slow Ranger is offline
Stuck Easily.
 
Join Date: Nov 2013
Posts: 108
Default Re: Ls swap 1997 Ranger 2wd

Badass, and clean work man.

Sent from my SM-N920V using Tapatalk
__________________
1999 Ford Ranger XLT, 3.0, 4x4, 5 Speed, Flareside. BFG All Terrain 32x11.50x15 on ProComp 7069 15x10.
Quote:
Originally Posted by zhillz View Post
The goal for this truck is 75% mud and 25% pussy getting; not necessarily in that order.
Reply With Quote
  #3  
Old 02-04-2017, 06:33 AM
Lone Wolf Ranger Lone Wolf Ranger is offline
Hurst shifter delete
 
Join Date: Dec 2016
Posts: 7
Default Re: Ls swap 1997 Ranger 2wd

Whoa

that's probably the best V8 swap Ranger I've ever seen. You're smart! I would have never thought to reverse the headers like that. Clever!
__________________
2003 XL 2.3 2wd
Standard cab
Standard bed
Standard shift

Last edited by Lone Wolf Ranger; 02-04-2017 at 06:36 AM. Reason: could't insert youtube clip
Reply With Quote
  #4  
Old 02-04-2017, 09:18 AM
hyghwayman hyghwayman is offline
Ford Pickup
 
Join Date: Jan 2017
Posts: 120
Default Re: Ls swap 1997 Ranger 2wd

Very nice and clean... Thank you for sharing, can't wait till spring - Gett'er Done!
__________________
2001 3.0L XL 5sp 2WD
Standard Cab - Short Bed (112" WB)
7.5 w/ 3.73
Acquired Dec. 23rd, 2016
History Unknown
Reply With Quote
  #5  
Old 02-04-2017, 10:24 AM
LS Ranger LS Ranger is offline
Liking the Ford Ranger Forum
 
Join Date: Feb 2017
Posts: 25
Default Re: Ls swap 1997 Ranger 2wd

Quote:
Originally Posted by Lone Wolf Ranger View Post
Whoa

that's probably the best V8 swap Ranger I've ever seen. You're smart! I would have never thought to reverse the headers like that. Clever!
Thanks
Reply With Quote
  #6  
Old 02-04-2017, 05:30 PM
RAT Ranger RAT Ranger is offline
Ford Ranger Driver
 
Join Date: May 2009
Posts: 1,419
Lightbulb Re: Ls swap 1997 Ranger 2wd

NICE!

Lil' more high tech than mine, but looks GOOD!

IMO only problems I see are the heat the headers produce causin issues with the master cylinder (boilin the fluid) & you overflow jug/windshield washer jug meltin & possibly causin a fire. That would SUK!
__________________
ALL THROTTLE, NO BOTTLE!!!

Daily Driver: 98 Thunderbolt

TOY: Green 94 Pro Street
Reply With Quote
  #7  
Old 02-04-2017, 07:43 PM
LS Ranger LS Ranger is offline
Liking the Ford Ranger Forum
 
Join Date: Feb 2017
Posts: 25
Default Re: Ls swap 1997 Ranger 2wd

Quote:
Originally Posted by RAT Ranger View Post
NICE!

Lil' more high tech than mine, but looks GOOD!

IMO only problems I see are the heat the headers produce causin issues with the master cylinder (boilin the fluid) & you overflow jug/windshield washer jug meltin & possibly causin a fire. That would SUK!
When it's done the washer jug and coolant jug will have a heat shield and the master cylinder is about 8" away from the headers so it should be ok if not I'll make a shield.
Reply With Quote
  #8  
Old 02-04-2017, 07:53 PM
94mtx 94mtx is offline
;p
 
Join Date: Aug 2011
Posts: 2,689
Default Re: Ls swap 1997 Ranger 2wd

You're a dick. Come do mine next.

----------

__________________
2000 Ford Ranger XL 2.5L 5-speed RWD 3.73 open - 170,000+ miles
Buggman LED 3BL/CARGO, Buggman Stang Dome LED conversion, LED Brake Light conversion, Line-X O.T.R., Air silencer removed
2.3L Headgasket/TIMING/Water Pump replacement guide
Reply With Quote
  #9  
Old 02-04-2017, 09:24 PM
RAT Ranger RAT Ranger is offline
Ford Ranger Driver
 
Join Date: May 2009
Posts: 1,419
Thumbs up Re: Ls swap 1997 Ranger 2wd

Quote:
Originally Posted by LS Ranger View Post
When it's done the washer jug and coolant jug will have a heat shield and the master cylinder is about 8" away from the headers so it should be ok if not I'll make a shield.
====================
Wasn't meanin to dig at ya, just was voicing a concern.

Good idea with the heat shield(s)!
Reply With Quote
  #10  
Old 02-05-2017, 03:22 AM
NoPower NoPower is offline
Ford Ranger Driver
 
Join Date: Apr 2015
Posts: 1,756
Default Re: Ls swap 1997 Ranger 2wd

Very sweet, The only thing that worrys me is how close the pass. header is to the antifreeze & washer tanks, Could be a melt down. I You
__________________
Myrtle: & Danna
1999 Ranger 4x4 3.0 Stepside Ext Cab XLT
2000 Mustang 4.6 Roush Supercharged ( Show Car )
1984 Elcamino 350 330 HP ( Nick's Show Car )
1959 Wife ( Arm Candy )
Danna passed away 5/26/2016
Reply With Quote
  #11  
Old 02-05-2017, 09:08 AM
Garfield Garfield is offline
Ford Ranger Driver
 
Join Date: Jan 2015
Posts: 843
Default Re: Ls swap 1997 Ranger 2wd

Very nice work!
__________________
My Build Thread
Reply With Quote
  #12  
Old 03-20-2017, 08:04 PM
LS Ranger LS Ranger is offline
Liking the Ford Ranger Forum
 
Join Date: Feb 2017
Posts: 25
Default Re: Ls swap 1997 Ranger 2wd

Pcm will be mounted behind airbag cover panel and wiring will go behind glove box and go through passenger floor/ firewall. Tci fastgate shifter should be here tomorrow.
Attached Images
File Type: jpg 84462-20170320-204122-a.jpg (37.8 KB, 46 views)
File Type: jpg 84461-20170320-204100-a.jpg (41.4 KB, 48 views)
Reply With Quote
  #13  
Old 04-14-2017, 09:07 AM
LS Ranger LS Ranger is offline
Liking the Ford Ranger Forum
 
Join Date: Feb 2017
Posts: 25
Default Re: Ls swap 1997 Ranger 2wd

Got the shifter installed and adjusted, all the plumbing is buttoned up. Throttle cable off the Silverado fit with zero modification.
Intake is all done and Dirty Dingo idler relocation bracket installed I had to get a 72'' belt since I'm not running power steering.
Installed 8.8 rear end with 4.10 gear ratio and 10'' drums.
New shoes, drums, hardware, adjusters and wheel cylinders.
I temporarily installed a mini spool until I get some extra cash or it explodes and breaks an axle.

Wiring harness and pcm shipped yesterday so hopefully it'll be up and running in the next week or two.

Last edited by LS Ranger; 04-14-2017 at 09:18 AM.
Reply With Quote
  #14  
Old 04-18-2017, 09:20 PM
LS Ranger LS Ranger is offline
Liking the Ford Ranger Forum
 
Join Date: Feb 2017
Posts: 25
Default Re: Ls swap 1997 Ranger 2wd

Harness came in and I got it installed. The truck fired right up and ran smooth. Now I've just got to go through and clean up the wiring and run battery cables, fix one leaky v-band and put the new driveshaft in. Pics are coming soon.
Reply With Quote
  #15  
Old 04-20-2017, 01:03 PM
SlamedMaz SlamedMaz is offline
Learning to use the forums
 
Join Date: Mar 2017
Posts: 9
Default Re: Ls swap 1997 Ranger 2wd

Love this thread been thinking about ls swap on my b2300 this winter def has me interested.
__________________
96 B2300 2.3 5 spd. Waiting to be dropped and turbo powered.
05 3500 Cummins CAI 5' Straight pipe out the back. Black Smoke Rolling machine.
13 Ford Edge- Mommas Ride
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pre-lift Questions 1997 Ranger 2wd DangerRanger37 Lifted Suspension 37 11-19-2015 05:50 AM
98+ 4x4 ranger rims on a 1997 2wd Stepsides Wheels and Tires 2 10-08-2013 10:40 AM
1997 2WD Ranger Larger Tires ImTJ Wheels and Tires 8 09-19-2011 07:23 PM
what is this? ford ranger 1997 xl 2wd wangbungal Exterior Tech 8 10-29-2010 08:21 PM
remove dash ford ranger 1997 xl 2wd wangbungal Interior Tech 1 06-12-2010 01:24 PM