Hey, the names brandon, and the Rangers Name is Rosie. i figured I would get a build thread going.
*To be continued*

__________________
2004 Edge 3.0 5 speed
4x4, flareside. Red

It all started with driving down around Bedford Indiana to pick up this beauty, I named her Rosie, and this is the first picture taken on the way back up from dealer.

image-637741812.jpg

__________________
2004 Edge 3.0 5 speed
4x4, flareside. Red

First modifications I made to the truck were mostly cosmetic.
I tinted the tail lights, and tinted the windows.
Went with a dark, (I think 15?%?) I went one step below legal in Indiana here.
It's dark at night, but haven't had any problems with police... Yet lol

__________________
2004 Edge 3.0 5 speed
4x4, flareside. Red

image-957495719.jpg
Vht on the tail lights


image-1739200127.jpg
Tint on the driver, passenger, and rear window

After the tint, I did some interior trim work with a plastic krylon paint, and I did the radio bezel, shifter/cup holder area, some door trim.


image-1927296044.jpg



image-644308869.jpg

Defrost vents

image-120037732.jpg

And front area

__________________
2004 Edge 3.0 5 speed
4x4, flareside. Red

First problem happened!
Parked for the evening, and came out in the morning to go get my girl, and I stepped on the clutch, and it went straight the floor.

So, I don't have too many pics here, but
Let's just say 1375 dollars more, I have all new hydraulic, master and slave cylinder and a new clutch.
That hurt, especially since I had only been driving it for a month.

Turns out the slave cylinder failed. But new clutch went in, and all was good!

__________________
2004 Edge 3.0 5 speed
4x4, flareside. Red