|
01-25-2015, 06:16 PM
|
|
Learning to use the forums
|
|
Join Date: Jan 2015
Posts: 14
|
|
Brad's 94 build
Just got on the forum figured that i would post up some of my build that i have already done.
The truck when i first got it.
First project was to paint the center of the wheels and smoke the tailights because they are cracked and got tired of looking at the cracks.
Then came the shackle flip
__________________
94 ranger 4.0L, auto, flipped hangers, rockers painted, more to come.
Last edited by 730squid; 01-25-2015 at 06:23 PM.
|
Register and never see these ads again. |
|
01-25-2015, 06:26 PM
|
|
Learning to use the forums
|
|
Join Date: Jan 2015
Posts: 14
|
|
Re: Brad's 94 build
Then i decided to paint the rockers and grill black.
__________________
94 ranger 4.0L, auto, flipped hangers, rockers painted, more to come.
Last edited by 730squid; 01-25-2015 at 06:32 PM.
|
01-25-2015, 06:29 PM
|
|
Learning to use the forums
|
|
Join Date: Jan 2015
Posts: 14
|
|
Re: Brad's 94 build
Then i got some wheels for Christmas and threw those on the other day.
Need to straighten out the bumper and spray the plastic on it black when weather allows.
__________________
94 ranger 4.0L, auto, flipped hangers, rockers painted, more to come.
|
01-25-2015, 06:54 PM
|
|
Last one to let you down
|
|
Join Date: Jul 2012
Posts: 3,166
|
|
Re: Brad's 94 build
Nice to see another good looking 94
|
01-26-2015, 10:09 AM
|
|
Learning to use the forums
|
|
Join Date: Jan 2015
Posts: 14
|
|
Re: Brad's 94 build
thanks, build is defiantly not done yet have some more stuff in mind that i would like to do. so far the list is: crystal clear headlights+corners and new tails. 06 mirrors, djm 3/4 kit, 60/40 bench mod or explorer buckets with expo consul. thinking about maybe doing a fiberglass incloser for my sub because as it stands i have no extended cab haha. Also thinking about some interior led's. Lots to do and i will update as i go on.
__________________
94 ranger 4.0L, auto, flipped hangers, rockers painted, more to come.
|
06-16-2015, 12:47 AM
|
|
Learning to use the forums
|
|
Join Date: Jan 2015
Posts: 14
|
|
Re: Brad's 94 build
Sorry guys been busy lately and forgot to update. So far I have got the 3/4 kit installed along with some air shocks on the rear from a hard body. Had to cut the bumpstops in half but once that was done it rides just like it did before lowering. Been liking it so far, either need to get some spacers or a new set of wheels with a little less offset (rubs a little at full lock) other than that I am ordering a window motor for the driver's side tomorrow because mine has been shot for a while as well as some front brakes, drilled and slotted rotors with ceramic pads. Need to do the rear but holding out on it probably just going to do an expo 8.8 with disks so putting it off for now.
__________________
94 ranger 4.0L, auto, flipped hangers, rockers painted, more to come.
|
01-12-2017, 10:41 PM
|
|
Learning to use the forums
|
|
Join Date: Jan 2015
Posts: 14
|
|
Re: Brad's 94 build
Its been a while will post update soon
----------
So I did same headlights recently and taillights looks much better now as well as new wheels did a set of svt wheels off of an 02 mustang
Sent from my LG-K550 using Tapatalk
__________________
94 ranger 4.0L, auto, flipped hangers, rockers painted, more to come.
Last edited by 730squid; 01-12-2017 at 10:37 PM.
|
Thread Tools |
Search this Thread |
|
|
|
|