 |
05-19-2015, 07:46 PM
|
 |
Brutal...
|
|
Join Date: Jul 2009
Posts: 1,405
|
|
You put some 26's on this and a body kit yet?
__________________
2005 Ranger 2.3 XLT Reg cab steppy: DJM 4/5, Expo 8.8 w/3.73LS axle swap. Hurst Shifter, flowmaster 40 series, edge front bumper, 18x9, 18x10 cobra wheels
Quote:
Originally Posted by Redneckstone
Tits. And when I say tits I mean perky titties. And when I mean perky titties I mean oh ya that's the stuff, hostess.
|
|
| Register and never see these ads again. |
|
|
05-19-2015, 08:09 PM
|
 |
I'm kind of a big deal
|
|
Join Date: Nov 2009
Posts: 4,848
|
|
Quote:
Originally Posted by TheBearJeweler
You put some 26's on this and a body kit yet?
|
Nah. Got some 30" wheels instead
|
05-19-2015, 08:31 PM
|
|
Brutal...
|
|
Join Date: Jul 2009
Posts: 1,405
|
|
Quote:
Originally Posted by camodown
Nah. Got some 30" wheels instead
|
sweet throw some 305/45-30 contitracs on em.
__________________
2005 Ranger 2.3 XLT Reg cab steppy: DJM 4/5, Expo 8.8 w/3.73LS axle swap. Hurst Shifter, flowmaster 40 series, edge front bumper, 18x9, 18x10 cobra wheels
Quote:
Originally Posted by Redneckstone
Tits. And when I say tits I mean perky titties. And when I mean perky titties I mean oh ya that's the stuff, hostess.
|
|
05-26-2015, 06:54 PM
|
|
I'm kind of a big deal
|
|
Join Date: Nov 2009
Posts: 4,848
|
|
Went for a drive today. Noticed a clicking when I got back from the transfer case, shifted just fine but still a tick. Going to have to check that out. I kind of remember hearing something weird when wheeling last month but it went away so who knows. I'll figure it out one day when I feel like digging into it.
Pic for the time being.
image-1265939332.jpg
|
05-26-2015, 07:03 PM
|
 |
Ford Ranger Driver
|
|
Join Date: Jan 2013
Posts: 4,731
|
|
Re: Camodown's Build
Quote:
Originally Posted by camodown
Went for a drive today. Noticed a clicking when I got back from the transfer case, shifted just fine but still a tick. Going to have to check that out. I kind of remember hearing something weird when wheeling last month but it went away so who knows. I'll figure it out one day when I feel like digging into it.
Pic for the time being.
Attachment 133403 |
How to fix noises Step one: 
__________________
Because Race Truck!
|
05-26-2015, 07:05 PM
|
|
I'm kind of a big deal
|
|
Join Date: Nov 2009
Posts: 4,848
|
|
Quote:
Originally Posted by shawn_house102
How to fix noises Step one:
|
Lol. That is used quite a bit.
It might just be low on fluid and it develops after the transfer case gets hot.
|
05-26-2015, 08:03 PM
|
|
I'm kind of a big deal
|
|
Join Date: Nov 2009
Posts: 4,848
|
|
I think I figured it out. Little bit of play in the front driveshaft where it connects to the the transfer case. Those threads were exposed and had rusted up in the tulip and the bolts from the superlift shaft are longer so it was a pain to work thru that rust. I thought I had worked them tight enough but some play developed after using it a bit. I'm going to have to go buy some metric taps so I can clean them out cause I didn't have the right one I needed when I first put it on.
Wish I would have noticed when the transfer case was out cause it would have been a lot easier to do it out of the truck.
|
05-27-2015, 09:21 AM
|
|
Ford Ranger Driver
|
|
Join Date: Jan 2013
Posts: 4,731
|
|
Re: Camodown's Build
You could pull it out and do it again. It's not a daily driver or anything.
__________________
Because Race Truck!
|
05-27-2015, 10:06 AM
|
|
Welcome to FRF!
|
|
Join Date: Oct 2010
Posts: 8,954
|
|
Re: Camodown's Build
Yea, it's just a measly 1354. Could be worse, like a 205.
----------
But seriously, tulip joints suck. Swap in an older 1354 and send your Level II case to me. I just want 2Low. 
|
05-27-2015, 10:08 AM
|
|
I'm kind of a big deal
|
|
Join Date: Nov 2009
Posts: 4,848
|
|
Quote:
Originally Posted by shawn_house102
You could pull it out and do it again. It's not a daily driver or anything.
|
Well sure I "could". Just don't want to.
Quote:
Originally Posted by Fordzilla80
Yea, it's just a measly 1354. Could be worse, like a 205.
|
Don't sneak in here.
|
05-27-2015, 10:11 AM
|
|
Welcome to FRF!
|
|
Join Date: Oct 2010
Posts: 8,954
|
|
Re: Camodown's Build
Quote:
Originally Posted by camodown
Don't sneak in here.
|
|
05-27-2015, 12:58 PM
|
|
I'm kind of a big deal
|
|
Join Date: Nov 2009
Posts: 4,848
|
|
Quote:
Originally Posted by Fordzilla80
But seriously, tulip joints suck. Swap in an older 1354 and send your Level II case to me. I just want 2Low. |
I thought it was knocking from inside the case. Was going to be pissed if I only got 300 miles out of it before I had to rebuild it or find another.
You are just going to have to suck it up and spend some cash on one I guess.
|
05-27-2015, 04:02 PM
|
|
I'm kind of a big deal
|
|
Join Date: Nov 2009
Posts: 4,848
|
|
What's wrong with this picture
image-661305709.jpg
|
05-27-2015, 04:09 PM
|
 |
Ford Ranger Driver
|
|
Join Date: Jan 2012
Posts: 6,279
|
|
Quote:
Originally Posted by shawn_house102
How to fix noises Step one:
|
I live by this 
----------
Quote:
Originally Posted by camodown
What's wrong with this picture
|
the fact that you can take a steady picture while cussing like that is amazing to me
__________________
Black 2008 ranger sport 4.0 SOHC SAS'd and converted to 4x4 riding on a Dana 50 up front and a sterling 10.50 in the rear regeared with 5.13's, mickey thompson classic 3's rapped in 37x12.50 maxxis creepy crawlers
|
05-27-2015, 04:36 PM
|
|
I'm kind of a big deal
|
|
Join Date: Nov 2009
Posts: 4,848
|
|
Quote:
Originally Posted by sole
I live by this ---------- the fact that you can take a steady picture while cussing like that is amazing to me |
I let some time pass before taking it.
Thinking of positives, cleaning out the other threads with the right tap worked great
|
| Thread Tools |
Search this Thread |
|
|
|
|
 |
Similar Threads
