|
|
|
|
03-24-2010, 07:02 PM
|
|
All LED and HID
|
|
Join Date: Aug 2009
Posts: 607
|
|
Trepaul's Level II Transformation
Well as most of you know I'm swapping in a manual case and going with OEM Level II stuff, minus the tailhousing.
So far I have all I need, but I'll list the prices I paid for the parts
Chrome floor bezel from a 02 FX4OR - $60
RCM cover - $40
T-case shifter arm and ball - $87 (Bought Shane some parts as a trade)
Modified my old Auto/Auto inspection cover to match the Level II's cover, minus all the rubberizing
T-case linkage from a 91 B2 and expo inspection cover rubber with offset case location - $10
Custom t-case linkage bracket to adapt to the standard M5OD-R1HD tailhousing - Free (I made it)
T-case from a 94 Explorer $100 (Pissed about the service with the company I bought it from so I'm going to try and make them pay for half for their mistakes.. Possibly $50)
Rubber soft plug to cap the speedo cable hole - $2.09
2 quarts of royal purple ATF - $24
U-joint clamps for the 1354m's front output - Free - $10 depending on if I buy new or not
The things I might need are:
95-97 expo front driveline if the superlift one won't reach - Up to $50, then new u-joints
1354m pigtail to signal the lights in the dash - Free, junkyard pocket mod
As of right now, I have $324 into the swap and the only thing I wish I had was the Level II inspection cover That part alone costs almost as much as I have into the swap!
On to the pics:
Tomorrow if all goes the way it should, I should be starting on the swap around 10am starting with picking the case up at 9am.
__________________
FXEdgeplorer Level II
Part 01-03
Part 06
Geared Locked Bright Loud
Quote:
Originally Posted by Carl
your like a guru.... like a little ranger boodah... covered in hair and knowlege
|
|
|
|
|
Register and never see these ads again. |
|
03-24-2010, 07:29 PM
|
|
Ford Tough
|
|
Join Date: Dec 2009
Posts: 325
|
|
Re: Trepaul's Level II Transformation
How do you like your Pioneer DVD Deck? I have the same one in my Fusion. Have you done the E-brake bypass for the video? Sorry for all the questions, it brought back memories. Oh, I like the paint on the center stack.
__________________
(SOLD) 2003 Ranger 4.0L V6 FX4
2001 F150 Supercrew Triton V8 (DD)
2008 Fusion 3.0L SEL V6 (my baby)
1992 Taurus SHO MTX (my toy-almost Supercharged)
2004 Nissan Murano SL AWD (Wife's car)
|
03-24-2010, 07:36 PM
|
|
~+!)@(#*$&%^
|
|
Join Date: May 2009
Posts: 3,033
|
|
Re: Trepaul's Level II Transformation
Nice Tre, what is the inspection thing you are talking about???
__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.
|
03-24-2010, 08:01 PM
|
|
All LED and HID
|
|
Join Date: Aug 2009
Posts: 607
|
|
Re: Trepaul's Level II Transformation
Lemme find the pic of it
__________________
FXEdgeplorer Level II
Part 01-03
Part 06
Geared Locked Bright Loud
Quote:
Originally Posted by Carl
your like a guru.... like a little ranger boodah... covered in hair and knowlege
|
|
03-24-2010, 08:04 PM
|
|
All LED and HID
|
|
Join Date: Aug 2009
Posts: 607
|
|
Re: Trepaul's Level II Transformation
You can see it in this pic:
__________________
FXEdgeplorer Level II
Part 01-03
Part 06
Geared Locked Bright Loud
Quote:
Originally Posted by Carl
your like a guru.... like a little ranger boodah... covered in hair and knowlege
|
|
03-24-2010, 09:33 PM
|
|
~+!)@(#*$&%^
|
|
Join Date: May 2009
Posts: 3,033
|
|
Re: Trepaul's Level II Transformation
uuhhh...which part? haha
__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.
|
03-24-2010, 10:21 PM
|
|
All LED and HID
|
|
Join Date: Aug 2009
Posts: 607
|
|
Re: Trepaul's Level II Transformation
Far left hand side. The only thing that looks like and inspection cover. lol
It's got a rubber casing around the whole thing and has moldings for the shifters built-in to the casing... It's awesome and just as expensive as the whole swap is going to cost me.
__________________
FXEdgeplorer Level II
Part 01-03
Part 06
Geared Locked Bright Loud
Quote:
Originally Posted by Carl
your like a guru.... like a little ranger boodah... covered in hair and knowlege
|
|
03-25-2010, 10:54 AM
|
Banned
|
|
Join Date: Sep 2009
Posts: 945
|
|
Re: Trepaul's Level II Transformation
This thread is weak. I was expecting the build since day 1! Trevor, you're lazy haha.
But I do have to say, the twin stick project is badass!
|
03-25-2010, 11:13 AM
|
|
~+!)@(#*$&%^
|
|
Join Date: May 2009
Posts: 3,033
|
|
Re: Trepaul's Level II Transformation
Got it...what does it do exactly? Noise and/or keep crap from coming in?
__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.
|
03-25-2010, 12:00 PM
|
|
All LED and HID
|
|
Join Date: Aug 2009
Posts: 607
|
|
Re: Trepaul's Level II Transformation
Alright, little update... Picked up the case this morning and got back home and realized they took off the bracket the linkage attaches to. I was pissed, called them up and complained and they credited $25 back to my card. So the case was $75 and Shane's on his way over with the bracket off one of his cases. Stupid junkyard employees.
Anyways, while I'm waiting for Shane I figured I'd give an update. Case is out and the rubber soft plug is installed and swapped breather tubes over as well.
Where the bracket goes the linkage attaches to... Mother F'ers. lol
Soft plug installed
1354e Vs. 1354m.... The new one is so clean!
__________________
FXEdgeplorer Level II
Part 01-03
Part 06
Geared Locked Bright Loud
Quote:
Originally Posted by Carl
your like a guru.... like a little ranger boodah... covered in hair and knowlege
|
|
03-25-2010, 02:55 PM
|
|
All LED and HID
|
|
Join Date: Aug 2009
Posts: 607
|
|
Re: Trepaul's Level II Transformation
Here's my most recent update.... Just gotta put the driveline back on, add fluid to the case and bolt the seats and center console back down! Lots of trimming and fine tuning had to be done, I'll get a few pics up later of that...
__________________
FXEdgeplorer Level II
Part 01-03
Part 06
Geared Locked Bright Loud
Quote:
Originally Posted by Carl
your like a guru.... like a little ranger boodah... covered in hair and knowlege
|
|
|
|
|
03-25-2010, 05:39 PM
|
|
All LED and HID
|
|
Join Date: Aug 2009
Posts: 607
|
|
Re: Trepaul's Level II Transformation
Alright, well I got the interior all cleaned up and seats and console bolted back down. Then I went underneath to install the driveline to realize the expo 1354m has a smaller rear driveline flange. I believe it's 4.25" and the ranger is 5" or 5.25".. Can't remember. Anyways, had to put the truck in 4lo and 1st gear to get the rear flange bolt off. Luckily I had a spare 1354e flange from a ranger in the shed and all I had to do was swap them.. I think the flange nut is 32mm like Shane was tellin me, or 1-1/4" socket. That's what I used. Then I bolted the driveline up and added about 1.25qts of Royal purple ATF and took it for a test drive. It's so awesome to be rolling and shift to 4lo, not high speed, but just not completely stopped. It shifts super smooth and the linkage doesn't move at all, well the bracket doesn't! Safe to say, I'm Level II'd! The only thing left I want to do is wire in the pigtail for 4hi and 4lo in case I have someone else drive it and they bump it into 4hi while driving. Use a bi-color LED and mount it in the new 2wd bezel, when I find one.
OH! Forgot to add, although the superlift shaft does telescope/extend, it doesn't reach the yokes.. By about 1/2" total distance. So it's safe to say I think I'm gonna sell the superlift shaft and go get me an expo 95-97 shaft and replace the u-joints. Since the ranger and expo have the same D35 and I'm running an expo 1354m, the expo 95-97 front driveline will be perfect and direct bolt on.
Difference in the 2 flanges. Expo vs. Ranger
The case and linkage bolted in and done
The pigtail that came with the case for the 4wd indicator
All done!
Enjoy! Hope this thread helps answer some questions, if you do have any, just lemme know! I'd be happy to help!
__________________
FXEdgeplorer Level II
Part 01-03
Part 06
Geared Locked Bright Loud
Quote:
Originally Posted by Carl
your like a guru.... like a little ranger boodah... covered in hair and knowlege
|
|
|
|
|
03-26-2010, 06:35 PM
|
|
Senior Member
|
|
Join Date: Jan 2010
Posts: 597
|
|
Re: Trepaul's Level II Transformation
Level II FTW! Your putting a lot of work into that thing. Great work.
__________________
1999 3.0 XLT 2WD
3" Performance Accessories Body Lift| 3" Susp. Lift (Coil Spacers w/Blocks in the rear)| 33x12.50 Big Foot X/T's| 70's Style Blade Wheels| Pro Comp ES 3000 Shocks| Fabbed front bumper w/ 4 130W KC Daylighters| Black grille| Cherry Bomb Glass Packs| Fabbed rear bumper w/ detachable tire mount| Stock 3.73 gears.....for now| Auto Trans.
|
03-26-2010, 06:57 PM
|
|
All LED and HID
|
|
Join Date: Aug 2009
Posts: 607
|
|
Re: Trepaul's Level II Transformation
Thanks man! Every spring break I do something new lol... Wonder what next spring break will bring? SAS? Supercharger? lol
__________________
FXEdgeplorer Level II
Part 01-03
Part 06
Geared Locked Bright Loud
Quote:
Originally Posted by Carl
your like a guru.... like a little ranger boodah... covered in hair and knowlege
|
|
03-26-2010, 08:50 PM
|
|
Senior Member
|
|
Join Date: Jan 2010
Posts: 597
|
|
Re: Trepaul's Level II Transformation
Quote:
Originally Posted by TrePaul86
Thanks man! Every spring break I do something new lol... Wonder what next spring break will bring? SAS? Supercharger? lol
|
You do the SAS, but buy the supercharger, send it to me and Ill do it on mine. Deal?
__________________
1999 3.0 XLT 2WD
3" Performance Accessories Body Lift| 3" Susp. Lift (Coil Spacers w/Blocks in the rear)| 33x12.50 Big Foot X/T's| 70's Style Blade Wheels| Pro Comp ES 3000 Shocks| Fabbed front bumper w/ 4 130W KC Daylighters| Black grille| Cherry Bomb Glass Packs| Fabbed rear bumper w/ detachable tire mount| Stock 3.73 gears.....for now| Auto Trans.
|
Thread Tools |
Search this Thread |
|
|
|
|