Does anyone have a CB radio in their truck?
I couldn't find anything on this with the search function. I was thinking about installing a CB radio by mounting it to the ceiling just back from the windshield in the center. Has anyone done this? If so, do you have a picture, and also, how did you secure the mount? Thanks for any info.
|
Cobra 29ltd BC. The hole was originally for an Explorer OHC, but I failed, so covered it up with this. Just cut the headliner and be smart about it. I used 1" nylon spacers and 6 total screws instead of the stock 4 on the bracket. Wires are routed up the A-pillar under the plastic.
http://i243.photobucket.com/albums/f...P4240057-1.jpg http://i243.photobucket.com/albums/f...1/P9040254.jpg http://i243.photobucket.com/albums/f...P4200004-3.jpg http://i632.photobucket.com/albums/u...B/P6130021.jpg Thanks Trevor for installing this while I was doing the bodylift!! |
Keep the ideas coming! =-)
|
nice install. I'm too lazy for all that so here is how I mounted mine.
http://i166.photobucket.com/albums/u.../Photo0056.jpg http://i166.photobucket.com/albums/u...Photo00571.jpg |
look at dustins and I mounted mine to the left of the air bag switch, sorry no pics
|
Quote:
|
|
i used to have one in my truck but i took it out...mine was mounted on the bottom part of the dash to the passenger side of my shifter...but i think i like the mounted on the ceiling better
|
I just use my 40 ch hand held one and leave it in my glove box (Other truck)
Works fine on the highways and back wood areas... distance is limited to 8-10 miles Dave |
i think the ceiling mount is the best but also probably the hardest to do. how much is the Cobra 29LTD BC?
|
Does anyone have a pic of something like a Uniden pro 510 mounted under the ashtray?
|
I used to have a radioshck brand mounted to the ashtray of my 96 ranger. looked real good. Not a big fan of the ceiling mount. Seams like if you don't wrap the mic cord around it, it would be hitting you in the face and get in the way.
|
Quote:
I plan on relocating the mic holder down and facing it up like it should be so it don't just slide out of it's holder. |
i've got everything to get mine installed (cobra 29 classic, 4 ft. fiberglass ant.) but i haven't decided where to put it yet.
i want to install it under the dash or at least out of the way but i have a Manual trans and a standard cab and its being difficult to find a good place to put it. |
If you were to go with the roof mount and then you wanted to take it off are you just screwed? is there anyway to replace what you cut out? haha
|
All times are GMT -7. The time now is 06:20 PM. |