Motor mount change out
I have a 2002 coil over and need to replace the motor mounts for my 5.0 conversion. Can anyone point me to a "how to" for this job? Engine is out and just do not see an easy approach to the nuts that hold the mounts in place.
|
Re: Motor mount change out
And the answer is, (for those of you who have an interest), yes you have to remove the coil springs. Took me about 3 hours to do the passenger side, and about an hour and a half to do the drivers side. Oh yea, found the lower ball joints were bad so replaced them also. Full day in the garage.
|
Re: Motor mount change out
I had to do the same on my 00. But that was the third time I tore the front end apart so I got pretty good at it!
|
All times are GMT -7. The time now is 04:11 PM. |