bench seat
 

I would like to swap out my bucket seats for a one piece bench seat, is it possible?

Re: bench seat
 

yep.

Re: bench seat
 

Do I need any adapters or is it an easy one for one replacement?

Re: bench seat
 

why do want to replace buckets in the first place? or do you have the split bench

Re: bench seat
 

it all depends on what year and what cab you have. anything is possible with enough time, money, and fabrication. some years will be a simple bolt in, others will not be.

Re: bench seat
 

I have a 2000 XLT 6cyl 4x4. I want to put in a bench seat due to a hip replacement. The seat belt attachment cuts into my right side.

Re: bench seat
 

still depends on cabs. it won't be a complete bolt in, but a reg cab should be close. ext cab are different. the front two bolts should line up, but then you will have to drill two holes for the back two. you will still have to mount your current seat belts to the seat frame. they have a pretensioner (part of the airbag system) on them. you will have to fabricate a mount for them on the bench seat. all the rangers benches came from had the seat belts mounted directly to the floor. that all stopped in 98 when the belts were mounted to the seats.

here is a 93ish reg cab bench i recovered mounted in a 97 ext cab.
http://i490.photobucket.com/albums/r..._5257428_n.jpg
http://i490.photobucket.com/albums/r..._8002354_n.jpg

Re: bench seat
 

You gave no info in a signature.
It us always possible to modify a bench seat to fit in an early ranger.
I have seen a bench seat that came out of a 63 Ford Falcon that fit perfectly in pre 98 rangers

Re: bench seat
 

YES i know this is an old thread but this is what im looking for what becnh seat is that from 2nd gen ranger??? other??? any info please...

Re: bench seat
 

its out of a 93

Re: bench seat
 

what 93 reg cab ranger???

Re: bench seat
 

yes sir

Re: bench seat
 

oh yes thank you sir gonna be dropping my rear in two weeks gotta buy the shims dont want to mess anything up but still wanna drive it raked up like yours??

Re: bench seat
 

Lol ill be down all the way around next weekend and ill be fixing the vibration as well
heres some before pics of the seat

http://i490.photobucket.com/albums/r...2011131909.jpg

http://i490.photobucket.com/albums/r...2011132030.jpg

Re: bench seat
 

well that is for a show truck so mine wont be so elaborate but i like that look do i need to do any mods ??

----------

also im going to do the 2" coils first then save up for the beams been going to the junk yards hoping i can come upi on some beams like brad did but i think thats 1 in a million shot