drop pitman?
whats the biggest drop pitman i can get? currently have a 6 inch...
|
Re: drop pitman?
I dont know the answer to your question but If you go any bigger I look into getting a custom swing set steering done.
|
Re: drop pitman?
pic's please!
|
Re: drop pitman?
ill try to get a pic, i just replaced my tie rod bar and drag link, with tre's and dom....turned out very nice, but truck drives like crap, i should of went with a different steering set up, too late now, my geometry is way off.....
|
Re: drop pitman?
skyjacker 6" is the biggest you can get. Fix your track bar like I told you and you'll be fine
|
Re: drop pitman?
1 Attachment(s)
how does this look, new tie rod and drag link...? but still pulls side to side, but not as bad as it was...
|
Re: drop pitman?
Looks better but your upper track bar mount needs to be up higher ( theres too much drop in it )
|
Re: drop pitman?
too much drop in it? not quite following you....? i need to make the bar longer and move the upper end up higher? bar is maxed out right now...
|
Re: drop pitman?
|
Re: drop pitman?
holy crap!!!! i dont have that kind of cash!! looks awsome tho! I wish!
|
Re: drop pitman?
NOT like that!!! Thats ttb superrunner suspension...you DO NOT need that. The link on the driver side of the track bar needs to be moved UP.
|
Re: drop pitman?
1 Attachment(s)
here is another pic of that upper mount
|
Re: drop pitman?
I'd drill another hole in that about an inch up. You might have to notch the mount ever so slightly but It wouldnt take long
|
Re: drop pitman?
ill give it a try...thanks...
|
Re: drop pitman?
Yea dude, just make SURE the track bar and drag link are parallel with each other. Then your front end will be more or less finished...then on to the rear...
|
All times are GMT -7. The time now is 05:09 AM. |