any help will do
I've got this 99 ranger with the 3.0 and she stumbles just a bit off idle. In fact the idle isn't exactly smooth but it's acceptable. It's when I step on the gas that she stumbles briefly and then comes on OK. This event happens in & out of gear. I've changed the plugs to the motorcraft fire wire, bosch performance wires.I took the truck to a friends shop and he hooked up an assortment of dianostic tool that basicly indicated that there wasn't a problem. (no codes) We cleaned the MAF TPS throdle body & I run about 3 oz. of lucas fuel injector cleaner in a tank a couple times a month.Oh yea , it;s more noticeable when warm but if I shut it off for a few( 10 to 15 min) & fire her back up she runs on all cylinders for a bit, then it,s back to the stumbling*** Any help will be appreciated
|
Re: any help will do
Clean your IAC, strange it isnt throwing a code? How long has this probelm been happening? recent?
|
Re: any help will do
About 6 mos but more noticeably lately IAC?
|
Re: any help will do
Idle air control valve. looks like this
http://img204.imageshack.us/img204/1492/photorc.jpg Uploaded with ImageShack.us and its on your throttle body. |
Re: any help will do
I,ll give it a shot of carb cleaner in the morning be fore I head out to work
|
Re: any help will do
NOO! it needs electrical contact cleaner. Such as MAF cleaner.
|
Re: any help will do
I,m just a shade tree mech. who,s trying to save a few cents thanks
|
Re: any help will do
You will ruin the sensor thats in it. Youll melt it, thats what carb cleaner does. If you dont have elecrical contact cleaner dont even bother with it.
|
Re: any help will do
Kinda seems like what my truck's been doing for awhile. But mine gets real severe after a little bit of driving. Unfortunately I don't have a fix for it yet.
|
Re: any help will do
Know that when I find one I'll be bragen bout it ,actually shareing what worked for me fit s better
|
All times are GMT -7. The time now is 10:51 PM. |