How To: Paint Radio Bezel
Tools Needed
7MM bolt holding bezel on remove those http://i952.photobucket.com/albums/a...r/47688a4a.jpg Use your fingers to pry it off the dash or use a flat blade screw drive and pry it off http://i952.photobucket.com/albums/a...r/f975a5df.jpg http://i952.photobucket.com/albums/a...r/bd5fb102.jpg Remove the connectors for the 12v http://i952.photobucket.com/albums/a...r/3ce25b5c.jpg Remove connector for the cig lighter http://i952.photobucket.com/albums/a...r/46bdeb0c.jpg remove the foglight connection http://i952.photobucket.com/albums/a...r/78b51c4f.jpg Unplug radio antenna also remove the radio harness http://i952.photobucket.com/albums/a...r/b9d2380a.jpg Now I dont have a stock radio but it removes the same way pull up on one side to release this tab and gently push radio toward front then repeat on other side and radio will come out the front of the bezel http://i952.photobucket.com/albums/a...r/74d7e126.jpg http://i952.photobucket.com/albums/a...r/2f073bd7.jpg Remove foglight switch 2 Phillips head screws http://i952.photobucket.com/albums/a...r/a8779f5e.jpg http://i952.photobucket.com/albums/a...r/5b347590.jpg Now starting at the bottom of the vent release the tabs holding the vent on once they are released to do the top ones http://i952.photobucket.com/albums/a...r/681a7921.jpg http://i952.photobucket.com/albums/a...r/9494ec84.jpg Now u have this http://i952.photobucket.com/albums/a...r/eadcc02b.jpg Remove 12v plug http://i952.photobucket.com/albums/a...r/ac3b4446.jpg Stuff tape down in there covering the metal parts of it http://i952.photobucket.com/albums/a...r/77f0c119.jpg Cig lighter cap wont come off so tape around it http://i952.photobucket.com/albums/a...r/4260acb4.jpg http://i952.photobucket.com/albums/a...r/1cae78c3.jpg Then your ready to paint scuff up the bezel with a light sand paper there is a rubber type stuff on there it will come off easily If you don't want to remove the rubber just clean real good with soap and water let dry and spray away |
Re: How To: Paint Radio Bezel
Great write up.
|
Re: How To: Paint Radio Bezel
Very nice, helpful write up!
|
Re: How To: Paint Radio Bezel
cool
|
Re: How To: Paint Radio Bezel
nice, that "rubbery stuff" is soft feel paint, recommend you remove it entirely.. as new paint will harden and old will stay soft, end result in chipping easy..... use 400 grit to remove soft feel, and this is ok spray solid color over 400g scratches.. if using a metallic color, final sand with 800grit before applying metallic color.
|
Re: How To: Paint Radio Bezel
what about the 4x4 switch? just tape over it?
|
Re: How To: Paint Radio Bezel
Quote:
|
Re: How To: Paint Radio Bezel
You can get the 12V plug out. One the back it unscrews. You just have to work it.
|
Re: How To: Paint Radio Bezel
Quote:
|
Re: How To: Paint Radio Bezel
Quote:
|
Re: How To: Paint Radio Bezel
for the 12v ground do i just pry the connector and wires apart?? im confused ...:/
|
Re: How To: Paint Radio Bezel
No, youll see man when you take off the bezel you can just pull the plugs off the 12v. Everything unplugs dont need to pry anything. After I unscrewed the bezel I just grabed the bezel at the top and pulled it off so I didnt damage the bezel at all with the screw driver.
|
Re: How To: Paint Radio Bezel
i ended up taking apart the 12 v by unscrewing it and i dropped it...shit fell apart and now it dont work cuz i never saw how everything went back together
|
Re: How To: Paint Radio Bezel
do you NEED to take off the bezel to paint/strip it?
|
Re: How To: Paint Radio Bezel
Quote:
|
All times are GMT -7. The time now is 10:37 PM. |