Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

- 3.0 Vulcan Tech (http://www.fordrangerforum.com/3-0-vulcan-tech/)

- - air silencer removal (http://www.fordrangerforum.com/3-0-vulcan-tech/34755-air-silencer-removal.html)

air silencer removal

I just read the thread in the how to section about hOw to take out your air silencer, and I noticed the thread was based off of a newer 4.0, so I was wondering if I can do this mod on my '94 3.0?

Re: air silencer removal

you should be able to, i was able to do it on my 01 2.5L, and my 02 2.3L

Re: air silencer removal

But that's the thing I have a 94

Re: air silencer removal

You probably can....

Open your airbox and see how it compares. If you're still not sure, take a couple pictures.

Re: air silencer removal

I did it on my 2002 3.0 if that helps

Re: air silencer removal

Na because there totally different

Re: air silencer removal

They are different but you still have a snorkel deal you can remove.

Quote:

Start off with an improved air intake to let the engine breath better. Below left you can see the Air Muffler and the baffle. The air muffler (on the left) goes between the air cleaner and the throttle body. The baffle to the right of it comes off the front of the air cleaner inside the body of your Ranger above the wheel well. As you can see in the picture below right, the air muffler was replaced with a piece of stainless but you can use PVC pipe. This will allow more air flow into your motor, increase HP, and make your motor a little bit louder. Your air cleaner is in two (2) parts; air cleaner canister, and mass air flow sensor. Open your air cleaner and remove the air filter, then unbolt the can in which the filter was in, when you pull the can off, the baffle will be attached to it. Remove the baffle, and reinstall the air cleaner. This will add more air flow, HP, and sound to your Ranger.

http://www.therangerstation.com/tech...ges/baffle.gif http://www.therangerstation.com/tech..._3nobaffle.gif

Re: air silencer removal

My intake looks nothing like that. And I have no "canisters" and I took out the filter and there's no baffle inside the airbox tube.