Ford Ranger Forum - Forums for Ford Ranger enthusiasts!
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Ford Ranger Forum - Forums for Ford Ranger enthusiasts! (http://www.fordrangerforum.com/)
-   Exterior Tech (http://www.fordrangerforum.com/exterior-tech/)
-   -   Headlights/Corners Finally Done "Pics Inside" (http://www.fordrangerforum.com/exterior-tech/33948-headlights-corners-finally-pics-inside.html)

4evermodding 05-20-2011 10:28 PM
Headlights/Corners Finally Done "Pics Inside"
 
My headlights, finally done, a brand new oem pair of both heads/corners

[

Ranger_EDGE 05-20-2011 10:29 PM
Re: Headlights/Corners Finally Done "Pics Inside"
 
so jealous!!!! i need to get mine in the oven!!! looks great bru!!

2004xlmiller 05-20-2011 10:30 PM
Re: Headlights/Corners Finally Done "Pics Inside"
 
awesome dude!

Christianguy 05-20-2011 10:31 PM
Re: Headlights/Corners Finally Done "Pics Inside"
 
You always do nice work!
Pics look good !

4evermodding 05-21-2011 12:27 AM
Re: Headlights/Corners Finally Done "Pics Inside"
 
Thanks I try

MTman777 05-21-2011 01:38 AM
Re: Headlights/Corners Finally Done "Pics Inside"
 
Looks good bru...

STL 05-21-2011 01:41 AM
Re: Headlights/Corners Finally Done "Pics Inside"
 
Looks good

Did you have problems getting the brand new headlights apart? I did some from a 2011 truck and they were very hard to get apart. Unlike ones I had done on older trucks.

dryin 05-21-2011 05:01 AM
Re: Headlights/Corners Finally Done "Pics Inside"
 
damn looks good bro

Clinton 05-21-2011 10:12 AM
Re: Headlights/Corners Finally Done "Pics Inside"
 
Nice work man! I need a spare set like that lol!!!

4evermodding 05-21-2011 10:44 AM
Re: Headlights/Corners Finally Done "Pics Inside"
 
Thanks STL, actually the driver headlight came apart after 40 min in the over at 250 degrees and the passenger side would not bulge until 5 attempts bakes at 250 degrees for 30-40 mins at a time. corners were very easy and I painted the halo around the outer lens for the corners also.


Quote:
Originally Posted by STL (Post 428124)
Looks good

Did you have problems getting the brand new headlights apart? I did some from a 2011 truck and they were very hard to get apart. Unlike ones I had done on older trucks.

Thanks Clinton, A spare, heck don't you go to the yard quite often, just grab you a few, lol yea i have my spares for backup, never know when they might get cracked.


Quote:
Originally Posted by Clinton (Post 428257)
Nice work man! I need a spare set like that lol!!!

Clinton 05-21-2011 11:25 AM
Re: Headlights/Corners Finally Done "Pics Inside"
 
I have never been able to find them in the yards I go to. Almost all are front end collisions and everything is wiped out!

TomN 05-21-2011 12:23 PM
Re: Headlights/Corners Finally Done "Pics Inside"
 
Quote:
Originally Posted by Clinton (Post 428303)
I have never been able to find them in the yards I go to. Almost all are front end collisions and everything is wiped out!
LIES. We found that driver side one that time you went with me.

STL 05-21-2011 01:10 PM
Re: Headlights/Corners Finally Done "Pics Inside"
 
Quote:
Originally Posted by 4evermodding (Post 428284)
Thanks STL, actually the driver headlight came apart after 40 min in the over at 250 degrees and the passenger side would not bulge until 5 attempts bakes at 250 degrees for 30-40 mins at a time. corners were very easy and I painted the halo around the outer lens for the corners also.
Sounds about right for the set I did. Total time if added up was 3 hours total spent in the oven heating them to separate.

Rangerman88 05-21-2011 01:42 PM
Re: Headlights/Corners Finally Done "Pics Inside"
 
Looks Freakioin Awesome!

Falco51 05-21-2011 08:23 PM
Re: Headlights/Corners Finally Done "Pics Inside"
 
Quote:
Originally Posted by STL (Post 428356)
Sounds about right for the set I did. Total time if added up was 3 hours total spent in the oven heating them to separate.
sorryy.... haha.


All times are GMT -7. The time now is 01:30 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page